Samsung SH18BW6 Service Manual page 23

Disassembly and Reassembly
No Parts
4 Heat Exchanger
5 Fan Motor
&
Cross Fan
4-3
26005A(2)_1.indd 12
Procedure
1) Loosen 2 fixing earth screws(CCW) of right side.
2) Detach the Connection Pipe.
3) Detach the Holder Pipe at the rear side.
4) Loosen the 4 fixing screws(CCW) of right and
left side.
5) Lifting the Heat Exchanger up a little to push
the up side for separation from the indoor unit.
1) Loosen the fixing screw(CCW).
2) Detach the Fan Motor from the Fan.
3) Detach the Fan From the left Holder Bearing.
Remark
Samsung Electronics
2006-04-14 ｿﾀﾈﾄ 5:03:11