Grip Adjustment; Using The Hand Strap; Inserting A Microsd Card - JVC Everio GZ-HD620 User Manual

Getting Started

Grip Adjustment

① Flip the grip belt over.
② Adjust the length of the belt.
③ Fasten the grip belt.
CAUTION:
Be sure to fasten the grip belt properly.
●
If the belt is loose, this unit may drop and result in injuries or damages.

Using the Hand Strap

When using the hand strap, loop it around your wrist.
Removing the Strap
While pressing A, pull B and remove the strap.
●
Attaching the Strap
Push in firmly until it clicks into place.
●
14

Inserting a microSD Card

When a commercially available microSD card is inserted, recordings can
still be made to the card when the remaining recording time on the hard
disk (HDD) runs out.
"Types of Usable microSD Card" （A P.15）
1
Press the power button for more than 2 seconds to turn off this unit.
2
Open the card slot cover.
3
Insert a microSD card.
Insert with the metal contact area facing outward.
●
CAUTION:
Make sure not to insert the card in the wrong direction.
●
It may cause damage to the unit and card.
Turn off the power of this unit before inserting or removing a card.
●
Memo:
To record to the card, it is necessary to adjust media settings.
●
When no card is available, set media settings to "HDD" for recording.
"REC MEDIA FOR VIDEO" （A P.122）
"REC MEDIA FOR IMAGE" （A P.122）
To use cards that have been used on other devices, it is necessary to
●
format (initialize) the card using "FORMAT SD CARD" from media set-
tings.
"FORMAT SD CARD" （A P.123）
Removing the Card
Push the card inward once, then pull it out straight.