Advertisement
Available languages
Available languages
4. Clean the blender base by simply wiping the base and touchpad
with a damp rag and water.
Cleaning tips and cautions
1. Do not use abrasives or stiff brushes to clean the blender base
or jar as this will dull or scratch the surface. Appearance damage
is not covered by Warrant.
2. Never submerge the blender motor in water. Avoid submerging
blender jars for more than 5 minutes. Water penetration through
the lower jar seals will reduce the life of the jar. After cleaning,
We recommend the blender jar be stored upright.
Trouble Shooting
Problem
Blender fails
run
Increased
vibration and
noise
Leaking from
lid
Solution
- Make sure power cord is firmly in the electric
outlet.
- Check to ensure switches are clean and
moving freely.
- Check to see if the overcurrent protection
switch has tripped, press the switch to reset.
- The thermal protector may have shut the
machine off. Wait for motor to cool down with
the power off in a cool spot (about 20 minutes)
- Place the machine on a level surface.
- Make sure the PC cup set securely on the
motor base.
- Container is too full, decrease the ingredients.
- Place the lid tightly on the container.
- Caution: Do not use blender if the PC cup is
crack.
11
Advertisement
