After Use Cleaning - Nesco Nutrimix Plus NC 901 User Manual

(Motor must be completely
stopped before positioning
container), avoid running the
blender with the container
empty.
4. Place the lid and muddler
tightly on the container.
5. Plug the blender into the
nearest outlet (if unplugged).
Press ON/Off switch to ON.
Select desired speed setting.
Most foods are blended on
high speed. Start heavy or
thick foods
recommended speed then
switch to HIGH (or dial the
Variable switch to get more
power).At the same time,
holding the
continuous stir and point
toward the side or corner of
the container to push
ingredients into the blades.
If your machine is microcom-
puter series, you can activate
the timer by selecting the
desired timer setting on the
control panel and then blender
will shut off automatically at
the end of the pre-set time.
10
on the
muddler
6. After the blender has been
stopped, wait until the blades
comes to a complete stop
before removing the lid or
container from the motor
base.
7. To use the Pulse Switch to
refresh drinks : Make sure the
power is OFF. With the
container on the motor base,
depress the Pulse Switch.
Release the switch to stop the
motor.
8. Press the ON/OFF switch
to OFF when not in use.
Maintenance &Cleaning

After use cleaning

1. Add 1 cup of hot water and
a drop of liquid dishwashing
soap to the blender jar.
2. Place the lid tightly onto the
jar. Place the blender jar on
the blender base, and with
your hand placed on top of the
lid ; press the Pulse Switch for
5 seconds.
3. Rinse with clear water until
all soap is rinsed from jar and
lid.