How To Move Machine; Maintenance - Makita LB1200F Instruction Manual

Small dust
collector
(Mounted on
main unit)
Carry Handle
Large dust
collector
(For
changeover)

How to move machine

• Raise handle to enable movement of machine.
• During transportation the saw band guard should be fully down and close to the
table.
• Do not use guarding for handling or transportation.
CAUTION:
• If handle is raised too high, the machine may topple over.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
• Never use gasoline, benzine, thinner, alcohol or the like. Discoloration,
deformation or cracks may result.
Cleaning
Clean out sawdust and chips from time to time. Carefully clean the blade guard and
moving parts inside the band saw.
Lubrication
To keep the band saw in tip-top running condition, and to assure maximum service
life, oil or grease the moving parts and rotating parts from time to time.
To reduce the emitted noise, always be sure that the blade is sharp and clean.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or
adjustment should be performed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool
specified in this manual. The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory or attachment for its stated
purpose. If you need any assistance for more details regarding these accessories,
ask your local Makita Service Center.
• Band saw stand
• Hex wrench
• Rip fence
• Miter gauge
• Circular ruler
• Extension table
• Sanding belt attachment
19