Samsung SCB-5000 Series User Manual page 26

camera operation
DaY/nighT : You can display pictures in color or in black and white.

❶ If the SPECIAL menu screen is displayed, use the Function Setup switch so
that the arrow indicates 'DAY/NIGHT'.
❷ Select a desired mode using the Function Setup switch according to the
picture display you want.
- auTo : The mode is switched
BURST MODE : Activate or deactivate the burst mode to maintain or

DURATION : This function is used to select the brightness of light where

GAIN LEVEL
VERY SLOW
NORMAL
VERY FAST
※ The day/night switching point of the camera can be adjusted.
DWELL TIME : You can select day/night switching delay time from.

M
If you set the AGC mode to off on the exposure menu, you cannot switch the day/night mode
to auto.
- COLOR : The picture is always displayed in color.
- B/W : The picture is always displayed in black and white.
M
If the lens mounted in the camera is different from the one set in <LENS> of the
<EXPOSURE> menu, then the night/day mode may not operate normally.
2_ camera operation
to 'Color' in a normal
environment, but
switches to 'B/W' mode
when ambient illumination
is low. To set up the
switching time for AUTO mode, press the Function Setup switch. You
can turn on or off the burst signal on B/W mode.
remove the color signal.
switching occurs.
LOW
B/W
1.6
SLOW 1.7
1.8
FAST 1.9
2
→ 3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
You can turn on or off the burst signal on B/W mode.
BURST MODE
▶ 1.
DURATION
2.
DWELL TIME
3.
RETURN
4.
MID
Color B/W
4 1.1
3.9 1.3
3.8 1.5
3.7 1.7
3.6 1.9
AUTO SETUP
HIGH
Color B/W
4.5 0.6
4.3 0.9
4.1 1.2
3.9 1.5
3.7 1.8
ON
NORMAL
30 SEC
Color
5
4.7
4.4
4.1
3.8