Cradlepoint CBR400 Product Manual page 70

CBR400| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT
6.7.1 Local IP Networks
Local IP Networks displays the following information for each network:
 Network Name
 IP address/Netmask
 DHCP Server (Enabled/Disabled)
 Routing Mode (NAT, Standard, IP
Passthrough, Hotspot, Disabled)
 Access Control (Admin Access, UPnP
Gateway, LAN Isolation)
 Attached Interfaces (Ethernet port,
WiFi, VLAN)
Click Add to configure a new network, or select an existing network and click Edit to view configuration options.
HotSpot (Captive Portal)
When you set a network as a ―Hotspot‖ under
Routing Mode, you will also need to make
sure to:
1) Configure hotspot settings under
System Settings → Hotspot
Services. Click on Configure to link to that page.
2) If you want a hotspot that includes WiFi, set one of your WiFi interfaces to ―Open‖ for its Security Mode and
attach this interface to your hotspot network. Otherwise guests will need to know the password to connect to the
WiFi network even before viewing a Terms of Service page (or other hotspot options).
Finally, make sure your WiFi interface is ―Enabled‖.
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 68