Warning Indications - JVC GZ-MS130U Instructions Manual

Warning Indications

Indication
SET DATE/TIME!
COMMUNICATING ERROR
NOT FORMATTED
FORMAT ERROR!
DATA DELETION ERROR
BUILT-IN MEMORY ERROR!
MEMORY CARD ERROR!
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
RECORDING FAILURE
USE AC ADAPTER
•
Set the clock. If the message still appears after setting the
clock, the battery for the clock has been depleted. Consult
your nearest JVC dealer.
•
Be sure to use JVC battery packs.
•
Select [OK] and select [YES] to perform formatting.
•
Check the operating procedure, and perform once again.
•
Turn off the camcorder, and turn it on again.
•
Turn off the camcorder, and turn it on again.
•
If the problem persists, backup all data, and then perform
formatting (All data is deleted).
•
Turn off the camcorder, and turn it on again.
•
Remove and re-insert the SD card (MultiMediaCard cannot be
used).
•
Remove any dirt from the SD card terminals.
•
Insert the SD card before switching the power on.
•
If the problem persists, backup all data, and then perform
formatting (All data is deleted).
•
Stop video recording, and then record a still image. (If an SD
card is removed or inserted during video recording, a still
image cannot be recorded.)
•
Turn off the camcorder, and turn it on again.
•
Use the AC Adapter as power supply.
Action
EN39