Advertisement
EDGE
EDGE
owner's manual
owner's manual
2. Button Definition and Function:
• S1 Play/Pause/Refuse call
• S2 Track forward
• S3 Track Back
• S4 Multi Use Button – Answer call, On/Off, Bluetooth Pairing Mode
• S5 Volume up "+"
• S6 Volume down "-"
• LED Red & Blue work light indicators
3. How to Pair to Bluetooth Devices:
Pairing is a process to connecting Bluetooth devices to each other so that they
communicate. It will create a permanent and safe link between your devices and provide
them with quick Bluetooth link without using any password.
• First step: With your EDGE powered off, press S4 button and hold for about 8-10
seconds until red & blue LED lights start quickly flashing alternately, which indicates
you are in pairing mode.
• Second step: While in paring mode, search for "RedFox EDGE" on your Bluetooth device.
• Third step: If you are asked to enter a Pin-Code, use 0000.
• Fourth step: When pairing is successful you will hear 2 beeps on the headset and
the red & blue LED lights will begin to flash slowly, single & stereo are connected
successfully.
Note:
If the EDGE cannot find the pairing device within 3 minutes, it will automatically shutdown.
If you have not put the EDGE in pairing mode, your mobile phone or other Bluetooth device cannot
find the EDGE, please insure the EDGE is in pairing status and your phone or other Bluetooth
device is in Bluetooth search mode.
4. Start-up and Shutdown:
• To turn on your EDGE: With the EDGE turned off: Press S4 key for 4 -6 seconds, the red
and blue lights will come on and you will hear 2 beeps on the headset. Release the S4
key.
2
Advertisement
