Siemens Hobs Instruction Manual page 21

When the cooking time has
elapsed
Changing the cooking time
Cancelling prematurely
Notes
3.
Touch the Ÿ or symbol.
The default value appears.
For : 30 minutes
For Ÿ: 10 minutes
The 1 indicator for the hotplate flashes again.
4.
Touch the Ÿ or symbol until the desired cooking
time appears in the timer indicator. The cooking
time flashes for several seconds and then
disappears. If you have set a cooking time for
several hotplates, it is always the shortest cooking
time that is displayed. The 1 hotplate indicators
light up.
When the cooking time has ended, the hotplate
switches off. A 0 appears in the heat setting indicator.
A signal sounds. 00 flashes in the timer indicator and
the 1 indicator flashes.
Touch the Ÿ and symbols repeatedly and at the
same time until the required 1 indicator flashes.
Change the cooking time using the Ÿ or symbol.
Touch the Ÿ and symbols repeatedly and at the
same time until the required 1 indicator flashes. Set
the timer function to 00 using the Ÿ symbol. The
indicator goes out after a few seconds.
If you would like to call up the remaining cooking time
for a hotplate: Touch the Ÿ and symbols repeatedly
and at the same time until the 1 indicator for the
relevant hotplate flashes. The cooking time is
displayed for 5 seconds.
You can set a time of up to 99 minutes.
Automatic time limit can also be activated using the
timer function.
The timer function is no longer active after a power
cut.
21