CiA TVV420S Installation And Operating Manual

4 channels digital video-recorder

Advertisement

Quick Links

4 channels digital video-recorder
I
n
s
t
a
l
l
a
t
i
o
n
/
O
p
e
r
a
t
i
n
g
m
a
n
u
a
l
I
n
s
t
a
l
l
a
t
i
o
n
/
O
p
e
r
a
t
i
n
g
m
a
n
u
a
l
(REV1.00)
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TVV420S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CiA TVV420S

  • Page 1 4 channels digital video-recorder (REV1.00) - 1 -...
  • Page 2: Important Safeguards And Warnings

    IMPORTANT SAFEGUARDS AND WARNINGS These symbols with supplemental markings are at the rear of the DVR system. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER, NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
  • Page 3 ■ Warning! Important Safety Instructions 1) Read Instructions All the safety and operating instructions should be read before the appliance is operated. 2) Retain Instructions The safety and operating instructions should be retained for future reference. 3) Heed Warnings All warnings on the product and in the operating instructions should be adhered to. 4) Follow Instructions All operating and use instructions should be followed.
  • Page 4 11) Power Sources This product should be operated only from the type of power resource indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power or other sources, refer to the operating instructions.
  • Page 5 18) Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 19) Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
  • Page 6: Table Of Contents

    Contents . OVERVIEW ......................6 1. Features ......................8 2. Unpacking ....................8 3. Front Panel Controls ..................9 4. Rear Panel Controls ................... 12 5. Remote Controller ..................13 . SYSTEM PROGRAMMING ..................14 1. Menu Structure ..................14 2. Password Setup ..................14 3.
  • Page 7: Overview

    . OVERVIEW 1. Features Stand-alone Type (Non-PC) The DVR System is the highly stable Digital Video Recorder based on embedded RTOS (Real Time Operating System). 4channel Cameras Input/Output connections. Real time display and recording The DVR System let user to simultaneously monitor four different camera images on user monitor with multi view screen display while real time recording.
  • Page 8: Front Panel Controls

    3. Front Panel Controls 11 12 Figure 1-1. Front Panel Controls 1. Camera number buttons/Move buttons Camera number buttons CH-1,CH-2,CH-3,CH-4 : Full screen for each channel Press the number of the camera you want to display on the monitor. Move buttons (Up) : Navigate up through the menu, zoom, play, search and set button.
  • Page 9 MENU button Press this button to display main menu on the monitor. Main menu include the following list. (Password Setup, Date/Time Setup, Record Setup, Schedule Setup, Alarm Setup, Motion Detection, Camera Name, Display Setup, Pan Tilt Setup, Other Conditions, Information) ENTER button Press this button located zoom area box, is used select sub menu for menu change or operation.
  • Page 10 9. Jog/Shuttle JOG dial Use the dial to search hard disk drive sector number. (1 unit) SHUTTLE ring Use the ring to adjust the playback speed, and to rewind or forward the image, and to control pan, tilt, zoom, pan auto, focus of Pan/Tilt/Zoom Camera or Speed Dome Camera. Use the ring to search hard disk drive sector number.
  • Page 11: Rear Panel Controls

    4. Rear Panel Controls Figure 1-2. Rear Panel Controls 1. ALARM IN/OUT terminal These are input and output terminals for alarm signals. 2. VIDEO out connector (RCA) This is an RCA output connector for a video signal. 3. MONITOR out connector (RCA) This is an RCA output connector for a video signal.
  • Page 12: Remote Controller

    5. Remote Controller ○ M-Screen ○ ○ Auto ○ ○ Freeze Mute ○ ○ Zoom Enter ○ ○ Menu ○ ○ ○ Search ○ ○ ○ ○ Right( Left( ○ ○ Play/Pause( II) Down ○ ○ Stop Pan-Auto ○ Slow ○...
  • Page 13: System Programming

    . SYSTEM PROGRAMING System Setup Turn on the power switch, DVR system will be worked. And the user have to set up the system of several conditions depend on user environments. 1. Menu Structure Press MENU button and the main menu will be displayed on monitor. Figure 2-1.
  • Page 14: Password Setup

    2. Password Setup Set up the password to protect data of established MENU. If password select set up “ON”, press the main MENU button, then, you will see the displaying message “Enter Password”. You will be able to enter in screen of main MENU if you put the established password.
  • Page 15: Date/Time Setup

    3. Date/Time Setup To set the current Date/Time, press the MENU button to display the Menu. - Use the direction button [ (Up), (Down)] to select the Date/Time Setup. - Press the ENTER button to display the Date/Time Setup menu on the monitor. Figure 2-3.
  • Page 16: Record Setup

    4. Record Setup To set the record condition, press the MENU button to display the Menu. - Use the direction button [ (Up), (Down)] to select the Record Setup. - Press the ENTER button to display the Record Setup menu on the monitor. Figure 2-4.
  • Page 17: Schedule Setup

    5. Schedule Setup User can set schedule time so that DVR can record at that time period. To set the schedule recording condition, press the MENU button to display the Menu. - Use the direction button [ (Up), (Down)] to select the Schedule Setup. - Press the ENTER button to display the Schedule Setup menu on the monitor.
  • Page 18: Alarm Setup

    6. Alarm Setup To set the record condition, press the MENU button to display the Menu. - Use the direction button [ (Up), (Down)] to select the Alarm Setup. - Press the ENTER button to display the Alarm Setup menu on the monitor. Figure 2-6.
  • Page 19: Motion Detection

    7. Motion Detection To set the motion detection, press the MENU button to display the Menu. - Use the direction button [ (Up), (Down)] to select the Motion Detection. - Press the ENTER button to display the Motion Detection menu on the monitor. This DVR has ‘Motion Detection’...
  • Page 20: Camera Name

    8. Camera Name To set the camera name, press the MENU button to display the Menu. - Use the direction button [ (Up), (Down)] to select the Camera Name. - Press the ENTER button to display the Camera Name menu on the monitor. User can insert the Camera Name(6characters) on the Monitor for display.
  • Page 21: Display Setup

    9. Display Setup To set the display mode, press the MENU button to display the Menu. - Use the direction button [ (Up), (Down)] to select the Display Setup. - Press the ENTER button to display the Display Setup menu on the monitor. Figure 2-9.
  • Page 22: Pan Tilt Setup

    Figure 2-12. Sequence PIP Display Setup 4. To set the Sequence PIP mode, use the direction button [ (Left), (Right)] to select SEQ. - To select the main screen, use the direction button [ (Up), (Down)] to select MAIN. - To change the channel, use the direction button [ (Left), (Right)]. In case SEQ PIP mode, the main channel always display and the other channel will be switching.
  • Page 23: Other Conditions

    11. Other Conditions To set the other conditions, press the MENU button to display the Menu. - Use the direction button [ (Up), (Down)] to select the Other Conditions. - Press the ENTER button to display the Other Conditions menu on the monitor. Figure 2-14.
  • Page 24 Figure 2-15. Information 1. To display remain HDD space information on the monitor, use the direction button [ (Up), (Down)] to select the HDD Info OSD. - To select ON or OFF, use the direction button [ (Left), (Right)]. 2. HDD Size Information - HDD Tot : Total HDD Size (DVR has auto detect HDD function.) - HDD Used : A part of used HDD size...
  • Page 25: System Operation

    . SYSTEM OPERATION - This product can record video signal of asynchronous up to 4. - Connect cameras, monitor, audio equipment and power cord to DVR system. (DVR system connections refer to Installation section.) - Press the POWER button on the rear of the DVR to turn on the system - Video signal from all 4 cameras display on the monitor.
  • Page 26: In Case Of Live Mode

    1. In case of live mode Display the Zoom area box by pressing the ZOOM button. Move the zoom area box to the desired position by pressing direction buttons. Press the ENTER button to make the picture twice as large as the original picture size. To exit the zoom picture on the screen, press the ZOOM button.
  • Page 27: Basic Recording

    1. Basic recording - Press the RECORD button, the REC indicator lights and recording starts. - If there is loss video signal during recording, ‘VIDEO LOSS’ appears on the screen and buzzer is alarming, however, recording is still processing. - If you press the menu button during recording, main menu display on the screen and recording mode is changed live mode.
  • Page 28: Playback Mode

    Schedule recording has priority than manual recording. If the DVR schedule recording that is planned in the Schedule Setup menu begins during the manual recording, manual recording stops at the same time as the end of schedule recording. 5. Playback Mode You cannot operate the PLAY and SEARCH button when a menu list is displayed on the screen.
  • Page 29 Record Type Record Type Quad Display Motion Quad 1 Camera 1 Motion Quad 2 Camera 2 Motion Quad 3 Camera 3 Motion Quad 4 Camera 4 Alarm 1 Auto Switching Alarm 2 PIP 1 Alarm 3 PIP 2 Alarm 4 Motion Detection Schedule Record Sequential PIP...
  • Page 30: Playback (In Case Of Using Play/Pause Button)

    - Change the desired time and date by pressing direction buttons. Move by <, > and select by ^, V. - Press the ENTER button to search. - The Play List will be re-displayed for specified date and time. 2. Playback (In case of using PLAY/PAUSE button) If user wants to see playback;...
  • Page 31: Freeze Mode

    6. Freeze Mode You can operate the FREEZE button in live mode(full screen, quad screen, PIP1, PIP2, sequence PIP). You cannot operate the FREEZE button when a menu or search list is displayed on the screen. The button doesn’t work when DVR is recording mode, pan/tilt/zoom control mode and zoom mode.
  • Page 32 Please set the ID Number of Pan Tilt Zoom Camera or Speed Dome Camera as below. Video Channel ID Number CH1 ---------------------- 001 CH2 ---------------------- 002 CH3 ---------------------- 003 CH4 ---------------------- 004 Summary for Pan/Tilt Control Mode PAN ON ------------------ Pan Control (Right - Left) TILT ON ----------------- Tilt Control (Up –...
  • Page 33: Installition

    . INSTALLATION 1. Connect cameras, monitor, audio equipment and power cord to DVR system as shown in Figure 4-1. MONITOR CAMERA#1 AUDIO Out To VIDEO IN 1 terminal(BNC) ▲ ▼ Up to 4 cameras To AUDIO IN terminal(RCA) MONITOR Out MICROPHONE To ALARM IN terminal To VIDEO Out...
  • Page 34: Connect Rs-485 Port

    2. Connect alarm inputs and alarm output as shown Figure 4-2. Alarm In #1 Alarm In #2 Alarm In #3 (+ , -) (+ , -) (+ , -) Alarm In #4 Alarm Out (+ , -) (NC, GND, NO) Figure 4-2.
  • Page 35 4. Connection of Pan/Tilt/Zoom Camera or Speed Dome Camera as shown Figure 4-4. RS-485 Control Line Camera Video Input Figure 4-4. Pan/Tilt/Zoom Camera (Speed Dome Camera) Connections - Using refer to Pan/Tilt/Zoom Control section. - 35 -...
  • Page 36: Appendix (Basic Functions For User's Comprehension)

    . APPENDIX 1. REMOVING A HARD DISK DRIVE - Checking the HDD status: Menu"Information - Handling a removable HDD for Inserting and Ejecting 1. Turn off the Power of DVR 2. Release the HDD Lock Switch in front of removable rack. 3.
  • Page 37: Recording Time Table

    2. Recording Time Table Recording Time Table by HDD, frame rate and modes Recording Mode Time-lapse mode Real-Time mode HD capacity 25 fps 1 fps 3 fps 5 fps 40 GB SUPER 319 hours 102 hours 63 hours SUPER 13 hours HIGH 493 hours 158 hours 93 hours HIGH...
  • Page 38: Troubleshooting

    3. Troubleshooting While using the DVR, certain unexpected situations may cause problem with the system. In many cases, system trouble can be solved through shooting check. Symptom Check Point Remark (refer to manual) *Check the connection between camera and DVR. Images are not appearing on *Refer to Installation in [Power and Video Line]...
  • Page 39: Specifications

    4. Specifications 4ch (BNC) Video Input NTSC/PAL Audio Input 1ch (m ono) Speed 4ch Real-tim e Display Split Screen 1,4, PIP Speed 4ch Real-tim e Resolution 360x480, 720x480 Com pression Method MPEG-II Recording 3k (360x480) Im age Size 5k (720x480) Mode Motion Detection, Sensor, Schedule Playback...
  • Page 40 - 40 -...

Table of Contents