CiA TVV424S User Manual

4 channels digital videorecorder

Advertisement

Quick Links

TVV424S
4 channels digital videorecorder
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TVV424S and is the answer not in the manual?

Questions and answers

Summary of Contents for CiA TVV424S

  • Page 1 TVV424S 4 channels digital videorecorder User Manual...
  • Page 2: Table Of Contents

    Table of Contents 1. Introduction 1-1 Safety Warning ………………………………………………………………………………… 1-2 Features …………………………………………………………………………………………. 1-3 Specifications …………………………………………………………………………………... 2. Installation 2-1 Package contents ………………………………………………………………………………. 2-2 Connection ………………………………………………………………………………….…. 2-3 Rack mount installation …………………………………………………………….………….. 2-4 RS232 /RS485 Remote protocol ……………………………………………………………..… 3. Configuration 3-1 Install HDD …………………………………………………………………………………….… 3-2 Front panel keypad ……………………………………………………………………………..
  • Page 3: Safety Warning

    1.1 Safety Warning All the safety and operating instructions should be read before the operation. The improper operation may cause permanent damage. 1.1.1 Please use the adaptor provided from AV TECH. 1.1.2 Please lift and place this equipment gently. 1.1.3 Do not expose this equipment to open sunlight. 1.1.4 Do not use this equipment near water or in contact with water.
  • Page 4: Specifications

    1.2.7 Digital Zoom can be up to 2 X 2 in DQR playback modes 1.2.8 4 channels and each channel has independent title generator (up to 10 characters). 1.2.9 Video Quality Adjustable on Each Channel 1.2.10 Alarm Input & Output Function 4 channels alarm input, ALARM display and one alarm output.
  • Page 5: Installation

    Audio output 2 audio outputs, (RCA) Motion Detect Sensitivity 256 Levels Video Loss Detection Refresh Rate 60 images/sec. for NTSC / 50 images/sec. for PAL Recording Rate 60 images/sec. for NTSC / 50 images/sec. for PAL Dwell Time Programmable (1~10 Sec) Key Lock Picture Zoom 2 x 2...
  • Page 6: Rack Mount Installation

    Main Monitor Alarm Video Camera Sensor Video Output Audio Output Alarm Input RS232 Video Input Audio Input Rack mount installation...
  • Page 7: Rs232 /Rs485 Remote Protocol

    Front Angle with Rock Mount Side View with Rack Mount RS232/ RS485 Remote Protocol You can use the PC keyboard to simulate DQR keypad. DATA: REMOTE PROTOCOL using 8 bit data、1 start bit、1stop bit FUNCTION STOP (FFH) (7FH) FUNCTION CODE ASCII FUNCTION CODE ASCII...
  • Page 8: Configuration

    3. Configuration HDD Installation 3.1.1 Installing Hard Drive into Cartridge 3.1.1.1. Please find the Key in the Cartridge. 3.1.1.2. Use the provided miniature key and insert into the keyhole, turning the key counter-clockwise. 3.1.1.3. Pull the handle outwards to remove the carrier body away from the cartridge frame.
  • Page 9 Locked (Irremovable) Unlocked (Removable) You must turn key lock to “ A ” position before powering on the unit. Otherwise HDD will not operate properly. 3.1.4 The Record Time differs on Record Speed and Record Quality. Please Refer to the following table.
  • Page 10: Install Hdd

    Front panel keypad PAUSE / Up ALARM TIMER PLAY AUTO Full Left Right MENU ENTER SEARCH SLOW AUTO POWER QUAD STOP / Down Please follow the instructions below to operate this unit. 1. Install HDD :This unit is with a removable hard disk drive tray. Before turning on this device, you must install hard disk drive (not included in standard package) for proper operation.
  • Page 11: Back Panel Connection

    FF : Under DQR play mode, it can play video forward at high speed, and press FF again to adjust speed at 1, 2, 4, 8, 16, 32 times. Right : Under setup mode , it can work as RIGHT button. 11.
  • Page 12 RISK OF ELECTRIC SHOCK MONITOR DO NOT OPEN POWER EXTERNAL I/O WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. VIDEO 1. POWER INPUT Connect to power cord (standard package attached).
  • Page 13 9 pin com port PIN 1. RS232-TX : RS-232 DQR can be controlled remotely by an external device or control system, such as a control keyboard, using RS-232 serial communications signals. PIN 2. RS232-RX : RS-232 DQR can be controlled remotely by an external device or control system, such as a control keyboard, using RS-232 serial communications signals.
  • Page 14 PIN 3. ALARM INPUT 1 (INPUT) To connect wire from ALARM INPUT 1 ( PIN 3 ) to GND ( PIN 9 ) connector, DQR will start recording and buzzer will be on. When alarm has been triggered, signal becomes “Low”, and it will stop all alarm activities.
  • Page 15: Menu Setup

    PIN 12. DISK FULL (OUTPUT) When HDD is full, it sends a signal to trigger next DQR record mode, if you install another DQR. Under normal operation, the signal remains “High”. But when disk full, DVR will send the “Low” signal. PIN 13.
  • Page 16: System Setup

    Press ”MENU” to enter main menu. You will need to enter password to access main menu. To press “Right” “Left” to move digit, and Press ”Up” “Down” to select number. Press ”ENTER” button to confirm password. PASSWORD : 0000 Ex.: Password : 0000 (Default : 0000) After keying in correct password, confirm by pressing ”ENTER”...
  • Page 17: System Event

    After keying the correct password, confirm by pressing ”ENTER” button, screen will show (MENU) following options. ► TIMER CAMERA TIMER -------- Scheduling Record RECORD CAMERA ------- Camera Channel Setup ALARM RECORD------- Record Mode Setup DWELL ALARM -------- Alarm Mode Setup REMOTE DWELL -------- Auto channel switching setup SYSTEM...
  • Page 18 3.5.1.2 Press ”ENTER” button to confirm AUDIO INPUT 3.5.1.3 Press ”Up” “Down” to choose the AUDIO INPUT : 1~4 3.5.1.4 Press ”MENU” to exit and confirm current operation. 3.5.1.5 Press ”MENU” again to exit and close AUDIO INPUT setup mode. 3.5.2 BUZZER setup: This device allows user to set the BUZZER.
  • Page 19 3.5.5 DATE DISPLAY setup This device allows user to set the title shown on monitor or not. 3.5.5.1 Press ” Up” or “ Down ” DATE DISPLAY setup to choose 3.5.5.2 Press ” ENTER” button to confirm DATE DISPLAY setup 3.5.5.3 Press ”...
  • Page 20: Timer Setup (Schedule Time-Lapse Record Mode Setup)

    This device allows user to have the HDD cleared. 3.5.9.1 Press ” Up ” or “ Down ” to choose CLEAR HDD setup. 3.5.9.2 Press ” ENTER ” to confirm CLEAR HDD setup. 3.5.9.3 Press ” Up ” or “ Down ” to choose CLEAR HDD setup YES or NO. YES: Confirm to clear HDD, and screen will show followings.
  • Page 21 Press ”MENU” to enter main menu. You will need to enter password to access main menu. Press “ Left ” or “Right ” to move digit, and press ” Up “ or “ Down ” to select number. Press ”ENTER” button to confirm password. PASSWORD : 0000 Ex.: PASSWORD : 0000 (Default : 0000) After keying the correct password, confirm by...
  • Page 22 Daily: Everyday MON: Monday TUE: Tuesday WED: Wednesday THU: Thursday FRI: Friday SAT: Saturday SUN: Sunday MO-FR: Monday to Friday SA-SU: Saturday & Sunday JAN-01: Special Date 3.6.1.3 Press “ Left ” or “ Right ” move to START record time 00:00 (HH:MM) Press ”...
  • Page 23: Camera Setup

    Press ”MENU” to enter main menu. You will need to enter password to access main menu. Press “ Left ” or “ Right ” to move digit, and to press ” Up ” or “ Down ” to select number. To press ” ENTER ” button to confirm PASSWORD: 0000 password.
  • Page 24: Record Setup

    3.7.1.1 Press” Up ” “ Down ” “ Left ” or “ Right ” : Select a channel in the Channel setup 3.7.1.2 Press ENTER: Confirm the channel 3.7.1.3 Press “ Left ” or “ Right ” : Select the location of title (11 characters maximum) 3.7.1.4 Press ”...
  • Page 25 Press ”Up” “Down” to choose RECORD setup (MENU) TIMER TIMER CAMERA CAMERA ►RECORD ►RECORD ALARM ALARM DWELL DWELL REMOTE REMOTE SYSTEM SYSTEM EVENT EVENT To choose Record item, and press “ ENTER ” to enter Record mode. Following screen will be displayed. (RECORD) ►RECORD IPS: 60 QUALITY : NORMAL...
  • Page 26: Alarm Setup

    3.8.3.2 Press ” ENTER ” to confirm Record Mode setup. 3.8.3.3 Press” Up ” or “ Down ” to choose Record Mode (Field / Frame). 3.8.3.4 Press ” MENU ” to exit and confirm current operation. 3.8.3.5 Press ” MENU ” again to exit and close RECORD MODE setup mode. 3.9 ALARM setup Press ”MENU”...
  • Page 27 Press “ ENTER ” to enter Alarm mode. Following screen will be displayed. (ALARM) ►ALARM ENABLE : YES ALARM DURATION :10 SEC RECORD IPS: 60 QUALITY : HIGH RECORD MODE : FRAME 3.9.1 ALARM ENABLE setup: 3.9.1.1 Press ” Up ” or “ Down ” to choose ALARM ENABLE setup. 3.9.1.2 Press ”...
  • Page 28: Dwell Setup

    3.9.4 QUALITY setup 3.9.4.1 Press ” Up ” or “ Down ” to choose QUALITY setup. 3.9.4.2 Press ” ENTER ” to confirm QUALITY setup. 3.9.4.3 Press” Up ” or “ Down ” to choose QUALITY level. BEST, HIGH, NORMAL, BASIC 3.9.4.4 Press ”...
  • Page 29 Press ”Up” “Down” to choose DWELL setup (MENU) TIMER TIMER CAMERA CAMERA RECORD RECORD ALARM ALARM ► DWELL ►DWELL REMOTE REMOTE SYSTEM SYSTEM EVENT EVENT To choose DWELL item, and press “ ENTER ” to enter Dwell mode. The following screen will be displayed. (DWELL) ►DWELL TIME:01 CH1:YES...
  • Page 30: Remote Setup

    3.10.3.1 Press ” Up ” or “ Down ” to choose CH2 setup. 3.10.3.2 Press ” ENTER ” to confirm 3.10.3.3 Press ” Up ” or “ Down ” to choose CH2 setup YES- Channel 2 will be shown on the screen sequentially. NO- Channel 2 will not be shown on the screen sequentially.
  • Page 31 Press ”MENU” to enter main menu. You will need to enter password to access main menu. Press “ Left ” or “ Right ” to move digit, and to press ” Up ” or “ Down ” to select number. Press ” ENTER ” button to confirm password.
  • Page 32 This device allows user to set the remote mode. 3.11.1.1 Press ” Up ” or “ Down ” to choose REMOTE MODE setup 3.11.1.2 Press ” ENTER ” to confirm REMOTE MODE setup 3.11.1.3 Press ” Up ” or “ Down ” to choose Interface for REMOTE MODE setup RS-232: Use RS-232 interface RS-485: Use RS-485 interface 3.11.1.4 Press ”...
  • Page 33: Event

    3.12 Event Press ”MENU” to enter main menu. You will need to enter password to access main menu. Press “ Left ” or “ Right ” to move digit, and to press” Up ” or “ Down ” to select number. Press PASSWORD: 0000 ”ENTER”...
  • Page 34: Operation

    PWR: Recovery time after power shut down (For example, power shut at 01:00 and power recover at 03:00. It will display to let user knows that there is power shut down before 03:00.) HDD: HDD error time VLS: Video loss time 4.
  • Page 35: Recording

    Before powering on the unit, make sure the HDD cartridge has been locked, and the POWER LED is red color now. After pressing POWER button, POWER LED will turn to green, then all other LED light will turn to RED except the LED for HDD. OSD screen will display “HDD Detecting”;...
  • Page 36: Camera Select

    The screen will be as right displayed. 2002 – JAN –01 01:02:03 ●    T : Timer record OW : HDD Over Write 032GB : If the OW location shows 32GB, it means that 32 GB HDD left for video recording.
  • Page 37: Key Lock

    maximum speed can be 32X. 4.7.1.2 Press “ PLAY ” then Press ”◄◄” for fast rewind searching screen. Press once “◄◄ ” to get speed for 2X. To press twice “◄◄ ” to get speed for 4X, … and the maximum speed can be 32X. 4.7.2 Slow Forward (S.F.) &...
  • Page 38: Compatible Hdd Brands

    HDD Not Found Please Insert HDD Please use the Key to lock the HDD Cartridge And press any key No power Check power cord connections. Confirm that there is power at the outlet. Not working when press any Check if it is under Key Lock mode. Press “MENU”...
  • Page 39 Maxtor DiamondMax 536DX(60GB) 4W060H4 60GB 7200rpm Maxtor DiamondMax Plus 9, Model#6Y120L 120GB 7200 rpm Seagate Barracuda ATA IV ST340016A 40GB 7200 rpm Seagate Barracuda ATA V, ST3120023A 120GB 7200 rpm Seagate Barracuda ATA V, ST380021A 80GB 7200rpm Western Digital Caviar WD400BB-00BSA0 40GB 7200 rpm Western Digital Caviar WD400EB-00CPF0 40GB 5400 rpm...

Table of Contents