Nokia Lumia 630 Service Manual

Nokia lumia 630 (rm-976, rm-977)/ lumia 630 dual sim (rm-978, rm-979)

Hide thumbs Also See for Lumia 630:

User manual (110 pages)

User manual (103 pages)

Quick start manual (2 pages)

troubleshooting

Table of Contents

Troubleshooting

Summary of Contents for Nokia Lumia 630

Page 1: Disassembly Steps
Exploded view Disassembly steps Assembly steps More More More Solder components Service devices Product controls and interfaces More More More Service concept Phone reset Proximity sensor troubleshooting More More More ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 2 Service Manual Level 1 and 2 Version history Nokia Lumia 630 (RM-976, RM-977) Nokia Lumia 630 Dual SIM (RM-978, RM-979) Version 1.0 Version Date Description 29.04.2014 First published version ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 3 SIZE 4 M1.4 x 3.4 I0019 BACK COVER I0022 SCREW TORX+ SIZE 4 M1.4 x 2.5 I0020 Only available Not reuseable Repair/swap as assembly after removal only in level 3 ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 4 Nokia Lumia 630 (RM-976, RM-977) Nokia Lumia 630 Dual SIM (RM-978, RM-979) Version 1.0 1) For disassembling you need the Nokia Standard toolkit version 2. You will also need the camera removal tool SS-305. 2) Protect the DISPLAY with protective film.
Page 6 6) Lift up one corner of the MAIN ANTENNA HOLE ADHESIVE with the dental tool. Peel off and discard the MAIN ANTENNA HOLE ADHESIVE. Be careful not to injure yourself or the device with the sharp end of the dental tool. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 7 7) Unscrew the two TORX+ size 4 screws in the order shown. Do not use them again. Discard them. 8) Unscrew the seven TORX+ size 4 screws in the order shown. Do not use them again. Discard them. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 8 9) Use the SS-93 to carefully release the CHASSIS ASSEMBLY from the DISPLAY ASSEMBLY. Be careful not to damage the shown flex. 10) Use the SS-93 to release the shown clip on the other side of the device. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 9 Be careful not to bend the flex or damage the connector. 12) Push the SS-93 under the EARPIECE PLATE to release it. Make sure to remove all EARPIECE PLATE adhesive remains from the DISPLAY ASSEMBLY. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 10 13) Use the dental tool to separate the EARPIECE from the EARPIECE PLATE. Do not use the EARPIECE PLATE again. Discard it. 14) Push the sharp end of the SS-93 under the IHF SPEAKER to release it. Remove it with tweezers. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 11 15) Release the IHF SPEAKER GASKET with dental tool. Remove and discard the IHF SPEAKER GASKET. 16) Use the SS-93 to release the IHF MESH. Remove and discard the IHF MESH. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 12 18) Place the SS-305 camera removal tool on top of the CAMERA as shown. Note the alignment. Push down the SS-305 until the camera retaining clips are released. Hold from the sides of the SS-305. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 13 19) Pull up the SS-305 while holding from the sides of it and remove the CAMERA. 20) Use dental tool to remove the CAMERA GASKET. Do not use it again. Discard it. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 14 21) Unscrew the shown TORX+ size 4 screw. Discard it. 22) Open the TOP FLEX connector with the SS-93. Be careful not to damage the connector or any components nearby. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 17 27) Lift up the ENGINE BOARD from the shown place so that the shown two clips holding it are released. 28) The ENGINE BOARD can now be separated. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 19 Nokia Lumia 630 Dual SIM (RM-978, RM-979) Version 1.0 1) For assembling you need the Nokia Standard toolkit version 2. 2) Remove the shown protective film from the EARPIECE PLATE. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 20 3) Place the EARPIECE PLATE to the DISPLAY ASSEMBLY as shown. Align the EARPIECE PLATE with the two shown guiding pins. Press the EARPIECE PLATE gently to activate the adhesive. 4) Remove the second EARPIECE PLATE protective film. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 21 Be careful not to damage the EARPIECE pins. 6) Note that this step is only for the single SIM variants. Place the DUAL SIM BARRIER as shown and press it to activate the adhesive. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 22 7) Place the USB BOOT as shown. 8) Place the ENGINE BOARD to the CHASSIS ASSEMBLY. Press the ENGINE BOARD as shown and make sure the two shown clips are attached properly. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 23 9) Remove the TOP FLEX protective film. 10) Place the TOP FLEX to the CHASSIS ASSEMBLY by using the two shown guiding pins. Press the flex part gently to activate the adhesive. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 24 11) Push the AV connector and the vibra to their places. 12) Connect the TOP FLEX connector with the SS-93. Be careful not to damage the connector or any components nearby. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 25 Be careful not to touch the CAMERA lens when pushing it down. Do not push black area near the CAMERA lens, autofocus mechanism is located below that black plastic and can be easily damaged. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 26 15) Remove the shown protective film from the CAMERA GASKET. 16) Place the CAMERA GASKET to the CHASSIS ASSEMBLY as shown. Push the CAMERA GASKET to activate the adhesive. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 27 CAMERA window if the CAMERA is placed in angle. Connect the CAMERA connector. Be careful not to damage the connector or any components nearby. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 28 19) Remove the shown protective film from the IHF SPEAKER GASKET. 20) Place the IHF SPEAKER GASKET to its place and press it to activate the adhesive. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 29 21) Remove the second IHF SPEAKER GASKET protective film. 22) Note the IHF SPEAKER alignment when placing it. Push the IHF SPEAKER gently to activate the adhesive. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 31 Be careful not to damage the connector or any nearby components. 26) Turn over the DISPLAY ASSEMBLY on top of the CHASSIS ASSEMBLY and press them so that both sides of the device are closed properly. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 32 28) Fasten the two TORX+ size 4 screws in the order shown to the torque of 12 Ncm. Note that these two screws are shorter than the seven screws shown in the previous step. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 34 31) Press the MAIN ANTENNA HOLE ADHESIVE to activate the adhesive. Remove the protective film from the MAIN ANTENNA HOLE ADHESIVE. 32) Place the BATTERY. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 35 33) Place the DISPLAY ASSEMBLY to the BACK COVER bottom end first. Press the DISPLAY ASSEMBLY to attach it properly to the BACK COVER. The Nokia Lumia 630 / Nokia Lumia 630 Dual SIM assembly procedure is complete. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 36 X1003 F1400 X2104 X1000 Grounding Grounding Camera IHF Speaker spring fuse spring spring BOTTOM BT/WLAN Battery Main antenna spring spring connector X6301 X2001 X7721 X7722 X7720 GNSS Keyboard spring ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 37 For more information, refer to the Service Bulletin (SB-011) on Nokia Online. Supplier or manufacturer contacts for tool re-order can be found in “Recommended service equipment” document on Nokia Online. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 39 Service Manual Level 1 and 2 Service concept Nokia Lumia 630 (RM-976, RM-977) Nokia Lumia 630 Dual SIM (RM-978, RM-979) Version 1.0 Flashing concept Service CA-101 software Product specific battery Transceiver ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 40 1. Press and hold the power key 2. Phone vibrates (release the power key) 3. Press and hold the volume down key 4. Exclamation mark is shown on the screen (release the volume down key) ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 41 Step 2 Input the following key combination: 1. Volume up 2. Volume down 3. Power 4. Volume down Step 3 The phone will reset and boot up automatically ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.
Page 42 Display, Touch and Proximity sensing related troubleshoot Proximity sensing This phone does not have optical proximity sensor, like previous Nokia products. In this device touch module is used for proximity sensing purpose. Proximity sensing works when call is active. When conductive large object (e.g.
Page 43 NOTE! Customer problems above do not require change of the display module. Changing the display module does not correct the situation. Updating the SW is the right procedure as the latest SW has the best proximity sensing parameters. ©2014 Nokia | Nokia Internal Use only | All Rights Reserved.

This manual is also suitable for:

Lumia 630 dual sim

Nokia Lumia 630 Service Manual

Table of Contents

Proximity sensor

troubleshooting

Troubleshooting

Related Manuals for Nokia Lumia 630

Summary of Contents for Nokia Lumia 630

Page 1: Disassembly Steps

This manual is also suitable for:

Table of Contents