Connecting The Audio Cables; Balanced I/O; Unbalanced I/O - Klark Teknik Square One Graphic Operator's Manual

Getting started

Connecting the audio cables

This section gives the connection details for balanced/unbalanced I/O and unbalanced inserts. For more
details on balancing, see "Balanced/unbalanced audio" on page 30.

Balanced I/O

For balanced I/O, connect the audio cables as shown below.
Screen/Ground

Unbalanced I/O

For unbalanced I/O, connect the audio cables as shown below.
Screen/Ground
(not connected at
unbalanced end)
Male XLR
1
2
Pin 1:
3
Pin 3: Cold signal
Pin 2: Hot signal
Male XLR
1
2
Pin 1:
3
Pin 3: Ground at
unbalanced end
Pin 2: Hot signal
Female XLR
2
Pin 2: Hot signal
Female XLR
2
Pin 2: Hot signal
8
1
Pin 1:
Screen/Ground
3
Pin 3: Cold signal
1
Pin 1:
Screen/Ground
3
(not connected at
unbalanced end)
Pin 3: Ground at
unbalanced end
Square ONE Graphic