Furuno RC18xx Series User Manual page 37

7. RC1840 Equipment Setup
7.2 DMC-5 (Continued)
Refer to the Operator's/Installation Manual, DMC-5)
7.2.4 SES Input (INMARSAT C Terminal)
*Watch* Pos: auto
VHF MF/HF
1) The display should appear as shown above, if it does continue to step 2.
If not record the error and check the appropriate equipment.
2) Press the [SET UP] key, then the 6 [SES] key.
3) Press the [SELECT] key three times to highlight SES (EGC),
then press the [ENT] key.
7.2.5 Time and Date
*Watch* Pos: auto
VHF MF/HF SES(EGC)
1) The display should appear as shown above, if it does continue to step 2.
If not record the error and check the appropriate equipment.
2) Press the [SELECT] key, then the [ENT] key.
3) Enter the Year and press the [SELECT] key.
4) Enter the Date, month and day, and press the [SELECT] key.
5) Enter the UTC Time, and press the [SELECT] key.
6) Then the [ENT] key.
*Watch* Pos: auto
VHF MF/HF SES(EGC)
7) The display should appear as shown above, if it does the setup is complete.
If not record the error and check the appropriate equipment.
00:00
00:00
21:30
7-3