Date Display - Emerson Research CKS2237 Owner's Manual

Hold the TIME ZONE button and then press either the SET + or SET – buttons
until your own time zone appears on the display, then release the buttons. The
clock display will change to the correct time in the time zone you selected. The
clock will always return to the correct time in the zone you selected after every
power interruption. If you move to a different time zone, simply change the default
zone display to the new zone and the SmartSet

DATE DISPLAY

The correct Month and Date appear in the small display. The Month and Date are
expressed numerically in the MM/DD format.
For example, May 21st will be displayed as (5. 21). This display adjusts automatically
for months of different lengths.
For example, at midnight on February 28th (2. 28), the display will automatically
change to March 1st (3. 1), unless it is a Leap Year, in which case the display will
change to February 29th (2. 29).
YEAR DISPLAY
To see the correct Year, depress the TIME and MONTH/DATE buttons together.
The small display changes from "Month/Date" to
"Year". When you release the TIME and MONTH/
DATE buttons the small display returns to Month
and Date.
DAYLIGHT SAVING AND LEAP YEAR ADJUSTMENTS
All Daylight Saving and Leap Year adjustments are made automatically by
®
the SmartSet internal computer as follows:
• Start of Daylight Saving Time:
At "2:00 AM" on the 2nd Sunday in March, the clock will automatically
advance to "3:00 AM".
• End of Daylight Saving Time:
At "3:00 AM" on the 1st Sunday in November, the clock will automatically
reset to "2:00 AM".
• Leap Year:
At "12:00 Midnight" on February 28th, the calendar display will change
to "2. 29".
CKS2237_073106.p65
®
will remember that setting for you.
8
8 31/7/2006, 11:11