Advertisement
Quick Start Guide
2.
Connect your AudioBox 22VSL to your computer and
make sure that the power LED is illuminated.
3.
Grab a microphone and a mic cable and plug them
into the AudioBox's Channel 1 mic input.
4.
Connect the Main Outputs of your AudioBox to your power
amplifier or powered monitors using balanced cables.
5.
If you're using passive speakers, connect them to
your power amplifier using speaker cable.
6.
If your microphone requires phantom power,
press the 48V button on the front panel.
7.
Turn on your amplifier or powered monitors.
8.
Connect a pair of headphones to your AudioBox 22 VSL.
Turn the AudioBox Phones volume
9.
control to the 12 o'clock position.
Set your Levels and Record!
Creating a Monitor Mix Using VSL
4
4.1
11
Advertisement
