Table of Contents
Advertisement
4
PREPARE THE AIR CONDITIONER
Attach the top-mounting rail to the air conditioning unit
using 4 type A screws.
Install right and left extensions by sliding them over the
top and bottom mounting rails on each side of Aros.
Pull fabric panels from outside edges of the extensions
toward the A/C unit then snap to secure.
|
AROS
10
5
PREPARE YOUR STANDARD, DOUBLE-HUNG WINDOW
Cut the window sash seal to the proper length for your
window. Remove the seal's backing and adhere it to the
underside of the window sash.
6
INSTALL THE AIR CONDITIONER IN THE WINDOW
• Place Aros on the sill with the bottom mounting rail against
its back edge.
• Center it and close the window securely behind the
top-mounting rail.
• Aros should be level or slightly tilted outside.
Use a level; about a 1/3 bubble will be the correct case slant
to the outside.
7
INSTALL WINDOW LOCKING BRACKET
AND FOAM TOP WINDOW GASKET
CAUTION
To prevent broken glass or damage to windows,
on vinyl or other similarly constructed windows, attach the
window locking bracket to the window side jamb with one
type B screw.
vinyl
wood
A) Cut foam top window gasket to the window width,
then stuff it between the glass and the window.
B) Stuff the foam between the glass and the window to
prevent air and insects from getting into the room.
NOTE:
If the gasket supplied does not fit your window,
obtain appropriate material locally to provide a proper
installation seal.
|
AROS
11
Hide quick links:
Advertisement
Table of Contents
