Table of Contents
Advertisement
Freestyle 1025 User Guide 5/11/99 5:37 pm Page 23
To delete all messages at the base
When all messages have been played
back you hear the announcement "End
of messages" and the LED display counts
down from 8-0.
During the 8-0 countdown press
Delete
At the end of the countdown you hear
the confirmation announcement
"All messages deleted".
To cancel deletion from the base
Cancel deletion by pressing the
Stop
button during the 8-0 countdown.
All messages will be saved including
any marked for deletion.
Answer delay
Answer delay sets the number of times your
Freestyle 1025 will ring before answering a call.
The original setting is for your machine to
answer after 6 rings. You can change this setting
between 2-9 rings or Time Saver.
If you set your 1025 Answer Delay to Time Saver
this means that when you call in from another phone
(remote access), if any messages have been recorded
your Freestyle 1025 will answer after only 2 rings.
If there are no messages, it will answer after 6 rings,
thereby allowing you the option of hanging up before
your Freestyle 1025 answers. In using Time Saver,
you can avoid the cost of a call.
Edition 3 - 13th October 1999
DELETE
STOP
NOTE
To check the answer delay setting
at the base station
Press buttons in order shown
Press the
SKIP >
Skip
Your Freestyle 1025 will announce the
current setting. "Calls will be answered
.
after 6 rings".
To change the answer delay setting
Press and hold the
Skip
the current setting is announced "6".
Keep holding the
your Freestyle 1025 will announce the
answer delay options: 7, 8, 9 "Time
Saver, 2, 3, 4, 5".
When you hear the setting you want,
release the
SKIP >
Skip
Freestyle 1025 will then announce the
new setting e.g. "Answer delay, Time saver"
and return to 'Answer on/off ' mode.
button.
button until
SKIP >
button and
SKIP >
button. Your
19
Advertisement
Table of Contents
