Connecting External Data Media - Grundig 37 VLC 6110 C User Manual

usB­operAtion
Connecting­external­­
data­media­
Before connecting the data medium, switch the
television to standby using »
d evice and then switch the television on again.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
notes:
If you use a network cable for external hard
7
disks which are connected to the »usB«
socket on the television, this network cable
must also be disconnected from the power
supply when the television is switched off.
External data media may not be disconnect-
7
ed from the television set while files on the
data medium are being accessed.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
d evices in EN 55022/EN 55024 is not
possible.
U SB transfer is not in itself an operating
7
mode. It is only an additional function.
­---------------------------------------------------------------------------------------------------------------
8 «. Connect the
1 Connect the »usB« socket of the television
and the corresponding socket on the data
device (external hard drive, digital camera,
card reader or MP3 player) using a USB ca-
ble;
or
plug the memory stick into the USB interface
»usB« of the television.
2 Confirm the display »
(green).
– T he file browser appears.
« with » «

­ 2 5
ENGLISH