Delay; Solo Mode; Sound Start; Reverse Sound - E-Mu Classic keys Operation Manual

THE SOUND START
PARAMETER CAN BE USEFUL
TO REMOVE THE GRADUAL
ATTACK OF A REVERSED
SOUND. SEE THE STEP-BY-
STEP CHAPTER FOR AN
APPLICATION USING

SOUND START.

EDIT MENU

DELAY

Delay varies the time between the arrival
of a MIDI Note On message and the onset
of a note. The delay time is adjustable
from 0 to 14 seconds (000-127).
DELAY
pri:000 sec:000

SOLO MODE

Solo mode provides the playing action of
a monophonic instrument with single
triggering and last-note priority. This
mode does not allow you to play a chord.
Solo mode will not retrigger the envelope
generators if a new note is played while
another is being held. This allows a legato
playing technique to be used. Solo mode
also provides more realistic effects when
working with guitar and wind controllers.
SOLO MODE
pri:Off sec:On
Sound
Start
The Sound Start parameter allows you to cut off the beginning of the sound. Higher values move the
start point toward the end of the sound.
SOUND START
This function allows you to set where a
sample begins playing when you hit a key.
A setting of 000 plays a sound from the
beginning, higher values move the
sample start point toward the end of the
sound.
SOUND START
pri:000 sec:000

REVERSE SOUND

When reverse sound is turned On, the
instrument will be played backwards.
When an instrument is reversed, any
loops in the sound will be ignored, which
means that the sound will not sustain
indefinitely.
REVERSE SOUND
pri:Off sec:On
69