Power; Directory Navigation - Genica Portable MP3/CD Player User Manual

Power

Batteries
Use two (2) 1.5V "AA" size Alkaline batteries.
Always remove Alkaline batteries prior to using the AC adapter.
Rechargable Batteries
Use two (2) 1.2V "AA" size rechargable Nickel Cadmium (NiCd)
batteries. When the LCD display indicates insufficient power, use the
external AC power adapter to recharge the batteries. You may recharge
the batteries while they remain in the unit and while you use the unit.
During the charging period, the LCD will start flashing indicating that the
batteries are recharging.
Nickel Metal-Hydride Batteries
NiMH rechargables may be used, but must be recharged by a
standalone NiMH compatible charger.
Internal Battery Charger
To activate the internal battery charger without playing a disc, move the
NORMAL/HOLD switch to HOLD and then press PLAY/PAUSE.
To toggle the charger ON and OFF while playing discs, press and hold
the REPEAT/ENTER button and then press the PLAY/PAUSE button.
External AC Power Supply Adapter
Always remove Alkaline batteries prior to use!
Connect the external AC adapter to the socket on the left side of the
player. Remove the plug when the unit is not in use. Never use the AC
adapter in or near water.
2

Directory Navigation

1. Place a CD in the player and push PLAY/PAUSE
2. Hold down PLAY/MODE until the display indicates "Dir". This
can be accomplished by pressing the PLAY/MODE button four
times. When the indicator gets to the "Random" selection,
the player will automatically start a different randomly
selected song.
3. Press and release the "REC/DIR/FILE" button until the display
shows "dIY" (dir), then press PREVIEW twice and hold until
it says "01 UP" (instead of "01", you may see a different
number). The player is at the top (ROOT) level of the
directory tree.
4. Two numbers will flash indicating directory.
5. Wait a second or two, then press NEXT to move down to
another directory.
6. To move to a lower level in the directory tree, ensure the
player is in dir mode, by pressing the REC/DIR/FILE button
until it displays DIY, and then press and hold the NEXT
button until the unit displays a number followed by "doun"
(down).
Note: If you wait too long or want to choose another
directory, you may need to press "REC/DIR/FILE"
button again to put the display in dir ("dIY") mode.
Bass (preset EQ modes)
<30 Hz 30-125
Hz
1. Normal 0 db 0 db
2. Extra Bass Boost +7 db +4 db
3. Bass Boost +5 db +3 db
4. Treble Boost -3 db -1 db
5. Extra Treble Boost -3 db -1 db
124- 500 Hz- 2-8 kHz >8 kHz
500 Hz 2 kHz
0 db 0 db 0 db 0 db
+3 db 0 db -1 db +2.5 db
+1 db 0 db 0 db -1 db
0 db 0 db +2.5 db +4 db
0 db +1 db +3 db -7.5 db
3