Table of Contents
Advertisement
Quick Links
COLOUR TELEVISION
AV-24WT2EK
AV-28WT2EK
INSTRUCTIONS
CONTENTS
SAFETY PRECAUTIONS ......... 2
buttons ............................... 4
parts ................................... 5
OPERATION ....................... 6
SOUND AND PICTURE .......... 12
OTHER FEATURES ............... 14
TELETEXT ............................. 17
OTHER PREPARATION ......... 19
TROUBLESHOOTING ........... 24
SPECIFICATIONS .................. 26
Advertisement
Table of Contents
Related Manuals for JVC Natural Vision AV-24WT2EK
Summary of Contents for JVC Natural Vision AV-24WT2EK
-
Page 1: Table Of Contents
COLOUR TELEVISION AV-24WT2EK AV-28WT2EK INSTRUCTIONS CONTENTS SAFETY PRECAUTIONS ... 2 Locations of remote control buttons ... 4 Locations of TV buttons and parts ... 5 PREPARATION AND BASIC OPERATION ... 6 SOUND AND PICTURE ... 12 OTHER FEATURES ... 14 TELETEXT ... -
Page 2: Safety Precautions
Thank you for purchasing this JVC colour television. To ensure your complete understanding, please read this manual thoroughly before operation. SAFETY PRECAUTIONS WARNING: CAUTION: WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - Page 3 Some Do’s And Don’ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical apparatus, care must be taken if you are to obtain the best results and safety is to be assured. DON’T continue to operate the equipment if you are in any doubt about it working DON’T remove any fixed cover as this may expose dangerous voltages.
-
Page 4: Locations Of Remote Control Buttons
• When switched to the VCR side, the the JVC VCR control buttons. Notes: • For details on button functions, see the JVC VCR manual. • Depending on your VCR, the remote control may not operate perfectly, and may not even control the VCR at all. -
Page 5: Locations Of Tv Buttons And Parts
Locations of TV buttons and parts FRONT PANEL Push to open (behind the door) EXT-3 REAR PANEL EXT- EXT- Remote control sensor ECO sensor Headphone jack (mini jack) EXT-3 terminals p.6, 19 Volume button (Press this button to display the volume level indicator. -
Page 6: Preparation And Basic Operation
PREPARATION AND BASIC OPERATION 1. Connecting the aerial and VCR If not connecting a VCR, do 1 only. If connecting a VCR, proceed 1 To RF output VCR / S-VHS VCR 2. Connecting other external devices Conditions: • This TV set has external device connectors, EXT-1 to EXT-3 to which you can connect a VCR. -
Page 7: Connecting The Power Cord
Devices which can be connected to the terminals on the rear panel Devices which can be connected to the terminals on the front panel Push to open 3. Connecting the power cord Insert the power plug into an AC outlet (AC 220 – 240 V, 50 Hz). -
Page 8: Initial Settings
TV on. 5. Initial Settings • When the TV is first turned ON, it enters into the initial setting mode, and the JVC logo is displayed. Press any button on the remote control. LANGUAGE menu appears. - Page 9 Press OK button. Broadcast stations are automatically allocated to the PR channels. The EDIT menu is displayed after the allocation is completed. • If you want to edit PR channels or allocate a station to PR0 (AV) channel, see page 21 “EDIT/MANUAL”...
-
Page 10: Adjust The Volume
2. Press channel. • Press page of the PR LIST. • Press previous page of the PR LIST. MENU 3. Press OK button. Press the Volume -/+ button. The Volume level indicator appears and the volume changes as you press the Volume -/+ buttons. - Page 11 Viewing images from external devices Repeatedly press the 0 button to select the EXT terminal. The current selection appears, and disappears after several seconds. When a station is not registered to the PR 0 (AV) channel, pressing the 0 button changes the selection as follows: TV mode PR channel EXT-1...
-
Page 12: Sound And Picture
SOUND AND PICTURE MUTE You can mute the volume to 0 instantly. This is convenient when answering the phone or when receiving visitors. Press (Mute). The sound is muted. To restore the sound: Press the Mute button again. HYPER SOUND You can enjoy sounds with a wider ambiance by Hyper sound. -
Page 13: Colour System
COLOUR SYSTEM The colour system is automatically selected, but if the picture is not clear or no colour appears, select the colour system manually. Press OK. The MENU appears. Press to select PICTURE SETTING, then press OK. The PICTURE SETTING menu appears. -
Page 14: Other Features
Note: • One minute before the SLEEP TIMER turns off the TV, “GOOD NIGHT!” appears. Three seconds before the SLEEP TIMER turns off the TV, “JVC” is displayed on the screen. BLUE BACK When viewing a PR channel with no... -
Page 15: Child Lock
CHILD LOCK You can lock some PR channels to prevent your children from watching them. To set the CHILD LOCK Press OK. The MENU appears. Press to select FEATURES, then press OK. The FEATURES menu appears. FEATURES SLEEP TIMER BLUE BACK CHILD LOCK :EXIT Press... - Page 16 OTHER FEATURES ZOOM Select a ZOOM mode to change the picture format. You can enlarge the picture to fill the wide TV screen (16:9 aspect ratio). In addition, you can stretch a normal picture (4:3 aspect ratio) to fill the wide TV screen.
-
Page 17: Teletext
TELETEXT Note: • If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station. (Outside buttons) ZOOM MENU (Inside buttons) VCR TEXT 1 Colour buttons 2 TV/text button 3 VCR/TEXT selector switch • When this switch is set to the TEXT side, the following buttons function as the teletext control button. - Page 18 TELETEXT HOLD You can hold a teletext page on the screen for a desired length of time, even while several other teletext pages are being received. Press HOLD. is displayed in the upper left of the screen, and the teletext page is held on the screen.
-
Page 19: Other Preparation
OTHER PREPARATION EXT SETTING You can select S-VIDEO or normal input for the EXT-1 and EXT-2 terminals, and you can give an EXT ID to each EXT input terminal. To select S-VIDEO input for a terminal Press OK. The MENU appears. Press to select EXT SOURCE, then press OK. -
Page 20: Auto Program
PR99 on this TV. When the TV receives a signal describing the station’s name, it allocates those stations, station IDs, and registers then as they were preset at the JVC factory. Press OK. The MENU appears. Press to select INSTALL, then press OK. - Page 21 EDIT/MANUAL You can change PR channel settings by doing any of the following: • You can delete an unwanted station from a PR channel, • You can change the PR channel number of a station, • You can add station IDs to PR channels, •...
- Page 22 OTHER PREPARATION To add a station ID to a station Press to select the station. EDIT CH/CC ----- BBC1 CH 21 BBC2 CH 22 CH 23 CH 24 CH 25 CH 26 CH 27 CH 28 CH 29 :MOVE :DELETE :INSERT :MANUAL Press red button.
- Page 23 To manually allocate a station to PR channel (Manual allocation) Press blue button. Your TV enters the Manual allocation mode. EDIT CH/CC ----- BBC1 CH 21 BBC2 CH 22 CH 23 CH 24 CH 25 CH 26 CH 27 CH 28 CH 29 :STORE :SEARCH+...
-
Page 24: Troubleshooting
TROUBLESHOOTING • If the plug is disconnected from the AC socket, or the TV aerial has problems, you may think there is a problem with the TV itself. Be sure to check the following before calling for service. IMPORTANT • Review all instructions in this manual. Problem No power supply. -
Page 25: Channel Table
Channel table • The following table shows the relationship between the displayed CH channel number and the actual channel number. CH -- Channel CH -- CH 21 CH 34 CH 22 CH 35 CH 23 CH 36 CH 24 CH 37 CH 25 CH 38 CH 26... -
Page 26: Specifications
(tearooms and halls in hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this constitutes an infringement of copyright. AV-24WT2EK CCIR I PAL (NTSC 3.58 / 4.43 MHz only in EXT modes) - Page 28 VICTOR COMPANY OF JAPAN, LIMITED 1997 VICTOR COMPANY OF JAPAN, LIMITED CQ40350-001-E 0497-Ki-AB-JMUK...