Trip Computer - Alfa Romeo Giulietta User Manual

INFORMATION
The trip computer provides a series of in-
formation relating to the route (e.g. time,
distance, speed, fuel consumption). Some
of this information is only available with the
navigation function activated and depends
on the navigation route set.
IMPORTANT Some information/operations
described below are only possible/available
with the ignition key in the MAR position.
To access the main trip computer screen,
press the TRIP button.
fig. 38
T R I P C O
T R I P C O
All the parameters are shown in the display
by symbols (see fig. 38).
If "Dynamic" mode is activated, two further
options are displayed (see "Dynamic display
screens" in the previous chapter).
By turning the OK button/knob you can se-
lect information relating to:
❍ Trip A (by selecting the letter "A") or for
Trip B (by selecting the letter "B"). The
display will show the following infor-
mation:
– Distance travelled (km or miles)
– Fuel consumption (km/l, mpg or
l/100km)
– Average speed (km/h or mph)
– Journey time (hh:mm)
❍ Instant information (car symbol). The
display will show the following infor-
mation:
– Range
– Instant fuel consumption
– Distance to the destination
A0K5028g
M P U T E R
M P U T E R

TRIP COMPUTER

SPECIFIC MENU
With the trip computer function activated it
is possible to access the specific Menu by
pressing the OK button/knob. The display
will show the following screen (fig. 39).
fig. 39
A0K5015g
49