Connect Hdd To Epr120; Remove Hdd Carrier From Dvr Reader - EverFocus EEPPRR--11220 User Manual

EPR120 User's Manual

2.3 Connect HDD to EPR120

1. Take out HDD carrier from DVR (Please refer to DVR user's manual).
2. Connect the HDD to the SATA interface of the HDD reader.
3. Turn on DVR Reader from power switch. The LED at EPR120 lights red.
4. Connect the USB plug to a free USB 2.0/3.0 port of the PC.
5.
Wait until the Remove/Eject icon shows up in System Tray. The LED at EPR120
lights purple.

2.4 Remove HDD carrier from DVR Reader

1. Exit from DVR Reader application.
2. Click on Remove/Eject icon in System Tray to stop the USB Mass Storage Device.
3. Turn off the power of the EPR120.
4.
Remove HDD carrier from EPR120.
6