Setup Dvr Reader; Install Dvr Reader Software; Connect Dvr Reader To Pc - EverFocus EEPPRR--11220 User Manual

EPR120 User's Manual
2.

Setup DVR Reader

Note: Please carefully follow these instructions to insert or remove the HDD carrier to
avoid damages to the DVR Reader or hard disk.

2.1 Install DVR Reader software

Please make sure, that the PC fulfills the minimum system requirements!
1. Turn on your PC
2. Insert DVR Reader CD-ROM
3.
Run the file setup.exe on CD, if the program does not automatically run
4.
Click "Next" and follow the instructions to install DVR Reader software

2.2 Connect DVR Reader to PC

Step 1: Connect the USB cable to DVR Reader and your PC.
Step 2: Connect power adapter's cable to DVR Reader. Keep the power switch in OFF
position. Connect the power adapter to mains voltage.
5