Heden IPCAM Us Er Manual page 27

Obtain the WAN IP address from the router
Take the WRT54G router of LINKSYS for example,
1) Obtain the IP address of the router(LAN gateway address),user name and password
for logon to the router from the network administrator,
2) Enter the LAN IP address of the router(LINKSYS WRT54G default:192.168.1.1) in the
address bar of the IE to log on to the router;Open the Status page to find out the WAN
address of the router.In this example,the address is 116.25.51.115.
Access the IP Camera from the Internet
User can access the IP Camera from the Internet,Enter WAN IP address + port number in
the IE to access IP Camera.For example,
Note: Make sure the Port mapping is success.You can do port mapping by two ways:
z Enter setting page of the router which IPCAM connect with to enable UPNP
function.Enter IPCAM "Upnp Settings" to enable UPNP and make sure the state is
"Upnp success".
Figure 3.4
Figure 3.4
Http:// 116.25.51.115:85
- 23 -
IPCAM User Manual