Table of Contents
Advertisement
IPCAM User Manual
3 HOW TO USE
3.1 Step by step to use
Follow the instructions below to get started after the Camera has been mounted properly.
When the IP camera powered on,it will rotate itself and stop to the center.
1) Use Network cable connect IP Camera to LAN.
2) Enter IP Camera Tool
to set the basic configuration.(details: 2.1)
3) When IP address of the Camera listed in the Result Field of the IP Camera Tool, it
means the basic configuiration is completed.
4) set the safety property of IE in the PC when you view it first time.(details:
4.1.4
)
5) Camera login(details:2.2)
6) Now you can use the IP Camera as Visitor,operator or Administration in the LAN.
3.2 Setting Wi-Fi of IP Camera
1) To use the wireless functions of the IP Camera, a wireless router like linksys is
required.
2) Enter the wireless router setup page(you may see the wireless router user manual).To
Find
out
the
SSID,Channel,Security
Way(NONE,WEP),Authentication
Type,
encryption.
3) Enter Wireless Lan Settings to input contents getted from the wireless router then
click Submit to reboot the device.
.
- 20 -
Hide quick links:
Advertisement
Table of Contents
