OCB -1000CW Manual page 20

Note 1 Date type: press ENTER for switch Y-M-D/ D-M-N.
2 "DATE": system date, press
press ENTER again to confirm.
"TIME": Same as date setup.
3. "OPR TIMEOUT", "DEV NUM": Press CANCEL and then Press the digit keys to
setup them.
4. "COMPANY NAME", "VEHICLE NO", "DRIVER NAME","LINE NUM": Press
Enter
left/right/up/down/enter key to setup.
5. Select "SAVE" and press
Note 1. "Power mode": on and Timing
2. ''Power off delay'': ACC/OFF
ENTER , and then press
key to pop out keyboard window, then use
ENTER to save the settings.
20
or to setup,