Using The Pip Function - JVC HV-53PRO Instructions Manual

Using the PIP function

You can view two pictures (MAIN and SUB) at the
same time.
Press the PIP button.
Press the PIP button changes the display as follows:
Twin pictures mode
2
MAIN
Picture in picture mode
SUB
5
MAIN
Cancel the PIP function
•You cannot view a picture from the same
programme number (or the same VIDEO terminal)
as both the MAIN-picture and the SUB-picture at
the same time.
•If the MAIN-picture signal is poor, then the quality
of the SUB-picture may also be poor.
•If the picture standards of both pictures are
different, the top and bottom or one of them may
be missing.
•The ZOOM function does not operate when
viewing pictures using the PIP function.
•The SUB-picture cannot be output from TV.
•If you press the PIP button when receiving the
Progressive Video Signal (525P signal), "525P"
appears on the screen and the PIP function does
not operate.
•In Twin pictures mode, compared to the normal
picture the two pictures are vertically elongated.
Choose a TV channel for the
SUB-picture
Press the SUB-P -/+ button.
Listen to the sound of SUB-picture
You can listen to the sound of SUB-picture on your
headphones while listening to the sound of MAIN-
picture on the TV speakers. For details, see "HEAD-
PHONE" on page 20.
5
SUB
2
Remote control buttons and functions
Change the colour system of the
SUB-picture
1 While the SUB-picture is displayed, press
the MENU/OK button to display the MENU
(main manu).
2 Press the and
/
PICTURE FEATURES, and then press the
MENU/OK button.
3 Press the buttons to choose COLOUR
/
SYSTEM, and then press the MENU/OK
button.
COLOUR SYSTEM
MAIN SUB
NTSC 3.58 AUTO
:OK
OK
TV :EXIT
DISP :BACK
4 Press the buttons to choose SUB,
/
and then press the
the appropriate colour system. Then press
the MENU/OK button.
•You cannot change the COLOUR SYSTEM of the
SUB-picture using the COLOUR SYSTEM button
on the remote control.
POSITION button
You can adjust the position of the SUB- Picture when
using the Picture in picture mode.
Press the POSITION button repeatedly.
Each time you press the button, the SUB- Picture
moves counterclockwise.
SWAP button
You can replace the MAIN-picture and the SUB-
picture with each other.
Press the SWAP button.
•Do not press the SWAP button while you are
recording the TV output on the VCR. If you do, the
output signal will change.
buttons to choose
/
buttons to choose
/
13