Netline Gigabit Pci Card Leds - Farallon NetLINE User Manual

14 Chapter 3
N LINE G
ET
The NetLINE Gigabit PCI Card LEDs can give you information about link
status and network activity.
Data: This light indicates any activity the PCI card detects on the
1000: This light indicates link status between the PCI card and the
100: This light indicates link status between the PCI card and the
10: This light indicates link status between the PCI card and the
Note:
PCI C
IGABIT
network.
I
A blinking light indicates brief bursts of data detected on the
port.
I
A steady light indicates streams of data detected on the port.
I
If the light is off, no data is detected on the port.
network.
I
A steady light indicates a good 1000 Mbps Gigabit Ethernet
link.
I
No light indicates there is no link, possibly due to a bad
cable, a bad connector, or a configuration error.
network.
I
A steady light indicates a good 100 Mbps Fast Ethernet link.
I
No light indicates there is no link, possibly due to a bad
cable, a bad connector, or a configuration error.
network.
I
A steady light indicates a good 10 Mbps Ethernet link.
I
No light indicates there is no link, possibly due to a bad
cable, a bad connector, or a configuration error.
If all four LEDs remain lit simultaneously, there is an error.
The card may not be properly installed or the driver may not
be loaded. See "Installation" on page 5 for instructions.
LED
ARD S