Windows 2000 - Farallon NetLINE User Manual

12 Chapter 2
W
When the Windows 2000 system first boots up after installing new
hardware, the system automatically detects the new hardware and
prompts you to install the driver software for the device.
1. Start your Windows 2000 system and log in. You must have
2. The Found New Hardware Wizard window will be displayed. In the
3. In the Locate Driver Files window, check the CD-ROM drives box.
4. When prompted, insert the NetLINE CD into the computer's CD-
5. Verify that the correct path to the driver software is shown, then
6. A message may appear indicating that the driver does not have
7. If prompted, restart your computer.
2000
INDOWS
Network Administrator privileges to install the driver software.
Install Hardware Device Drivers window, click Search for a
suitable driver for my device (recommended), then click the Next
button.
ROM drive and type the path to the driver. Select OK.
click the Next button.
the Windows 2000 digital signature. Click Yes to continue. The
driver is designed to work with Windows 2000 and is fully
compatible with the Windows 2000 operating system.