Rear Panel Diagrams; Cable Connections - JVC C-13910, C-13911, C-20910, AV-20920, AV-20921, AV-27920 User Manual

6 C O N N E C T I O N S

REAR PANEL DIAGRAMS

C-13910 • C-13911
C-20910

CABLE CONNECTIONS

T h e re are two basic types of antenna/cable hookups, but they are easy to distinguish.
# 1 If you have an a n t e n n a , or have a cable TV system that does not re q u i re you to use a cable box to tune
channels, use diagram #1. (No cable box, Diagram #1.)
# 2 If you use a cable box to access any or all channels, use diagram #2. (Cable box, Diagram #2.)
#1
Illustration of C-20910
#2
Illustration of C-20910
AV-20920 • AV-20921 AV-27920
1) Connect the cable or antenna
wire out from the wall, in to the
VCR RF input.
2) Connect an RF cable o u t f rom the
V C R output, i n to the TV's RF input.
Refer to the VCR's instructions.
If you want to use the VCR as a
separate tuner, (in other words
not be required to have the VCR
on Channel 3 or 4 when the
power is on) you can connect a
two-way splitter in between the
cable and the VCR connections.
1) Connect the cable wire out from
the wall in to the cable box RF
input.
2) Connect an RF cable out from
the cable box, in to VCR RF
input.
3) Connect an RF cable o u t f ro m
V C R RF output, i n to TV VHF/UHF
i n p u t .
Refer to the VCR and/or cable
box instructions.