Subscribe to Our Youtube Channel
Related Manuals for SWIT S-4903T
Summary of Contents for SWIT S-4903T
- Page 1 S-4903T/R Wireless HD Transmission System User Manual Ver:V1.0V01 Please read this User Manual throughout before using.
- Page 2 Reproduction in whole or in part without written permission is prohibited. ． All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners. Due to constant effort of product development, SWIT reserves the right to make changes and ．...
-
Page 3: For Your Safety
For Your Safety Before start, please follow the safety precautions below Do not try the followings: 1. Unauthorized repairs or parts replacement or other operations. 2. Inappropriate placement including but not limited to lighting, fire, exposure to rain, water or gas. 3. -
Page 4: Product Introduction
Support AES 128-bit encryption to protect the transmission. V-mount fit and power ◆ ◆ ◆ ◆ Both the transmitter S-4903T and receiver S-4903R are equipped with male and female V-mount, for V-mount camera mounting and V-mount battery powering. ◆ ◆ ◆ ◆... - Page 5 SDI LOOP: 3G/HD-SDI loop through output (BNC connector) Power: Switch the power on/off ⑶ V-mount power adaptor ⑷ Connect the S-4903T to V-mount cameras or devices, and supply DC power ⑸ LED status indicators Including Power, Video Signal and Wireless connection condition indicators ⑹...
- Page 6 S-4903R Receiver Front View Rear View ⑴ Power: Switch the power on/off SDI OUT: 3G/HD-SDI output x2 (BNC connector) ⑵ V-mount power adaptor ⑶ Connect the S-4903R to V-mount devices, and supply DC power ⑷ L ED status indicators Including Power, Video Signal and Wireless connection condition indicators DC-IN ⑸...
-
Page 7: System Connection
3. Connect the “SDI OUT” port of S-4903R receiver with SDI monitor or receiving devices. 4. Power on the S-4903T and S-4903R by battery or 4-pin XLR DC cable, and the system will search wireless connection automatically, and display OSD as Pic (1). -
Page 8: Troubleshooting
Pic (6) OSD Display Possible Causes Solution Check the power supply of the The transmitter S-4903T is powered off transmitter. Fix on the antennas to both transmitter Antenna unconnected of either and receiver, and check the connection transmitter or receiver conditions. -
Page 9: Specifications
1 7V ～ ～ Working environment Temperature: 0°C -+40°C Dimension 146×344×58 (with antenna) Net weight 624g (with antenna) 655g (with antenna) 7. Packing List S-4903T Transmitter × S-4903R Receiver × Antenna × Power cable × 4-pin XLR Power adaptor ×...
Need help?
Do you have a question about the S-4903T and is the answer not in the manual?
Questions and answers