Advertisement
The Odyssey Products TM1-BI Bi-Amp Processor
Input Adapter Card for the Odyssey TM-1 Monitor
PT# TM1-BI
1. Plug the TM1-BI card into the DB25 Processor Input connector on the back of the Odyssey TM-1
Monitor.
2. Connect the bi-amped outputs from the processor to the screw-type connector on the TM1-BI card.
3. Connection is made to the 3.5-mm spacing connector on the TM1-BI board as follows.
L.H
-
Left Channel High Frequency
L-
-
Left Channel Minus
C.L
-
Center Channel Low Frequency
R.H
-
Right Channel High Frequency
R-
-
Right Channel Minus
LS+
-
Left Surround Plus
RS+
-
Right Surround Minus
SW+ -
Subwoofer Plus
LE.H -
Left Extra High Frequency
LE-
-
Left Extra Minus
RE.L -
Right Extra Low Frequency
ODYSSEY PRODUCTS
LH
LL
L-
CH
CL
C-
RH
RL
(Ground from CP500)
770.825.0243
R-
LS+ LS- RS+ RS-
SW+ SW- SH
L.L
C.H
C-
R.L
SH
LS-
RS-
SW-
LE.L -
RE.H -
RE-
Fax: 770.825.0245
LEH LEL
LE- REH REL RE-
-
Left Channel Low Frequency
-
Center Channel High Frequency
-
Center Channel Minus
-
Right Channel Low Frequency
-
Audio Shield (if necessary)
-
Left Surround Minus
-
Right Surround Minus
-
Subwoofer Minus
Left Extra Low Frequency
Right Extra High Frequency
-
Right Extra Minus
Page 7 of 11
Advertisement
