Advertisement
Quick Links
Film-Tech
The information contained in this Adobe Acrobat pdf
file is provided at your own risk and good judgment.
These manuals are designed to facilitate the
exchange of information related to cinema
projection and film handling, with no warranties nor
obligations from the authors, for qualified field
service engineers.
If you are not a qualified technician, please make no
adjustments to anything you may read about in these
Adobe manual downloads.
www.film-tech.com
Advertisement
Summary of Contents for Film-Tech TM-1
- Page 1 Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema projection and film handling, with no warranties nor obligations from the authors, for qualified field service engineers.
- Page 2 Installation & User Manual for the Model TM-1 Sound Monitor Odyssey Products, Inc.
- Page 3 TTENTION NSTALLER These TM-1 Monitors are equipped with a new switch latching circuit. It replaces the mechanical latch mechanism built into older push buttons with an electronic equivalent. The operation of the switches remains the same. The only difference will be that Left, Center, and Right channels will be selected each time the TM-1 Monitor is powered up.
- Page 4 Page 3 of 11 TM-1 Monitor Back View AMP GAIN PRO GAIN Data Port 1 Processor Inputs Amplifier Inputs Power Data Port 2 DB25 Processor Input Fuse Holder DB37 Amplifier Input Connector (THX pin-out) (1.5 Amp Fuse) connector. Also contains the Hearing Accepts Odyssey Input 25 Impaired output.
- Page 5 Page 4 of 11 TM-1 Sound Monitor This product is intended for commercial use and for installation in an equipment cabinet designed for commercial use. This installation manual is for use by qualified personnel only. Do not open the unit or perform any servicing unless you are qualified to do so.
- Page 6 Page 5 of 11 Input DB25 Board Configuration (Compatible with THX and Sony Pin-outs) Channel Terminals On Card DB25 Pin Left Shield Left Plus Left Minus Center Shield Center Plus Center Minus Right Shield Right Plus Right Minus Left Surround Shield Left Surround Plus Left Surround Minus Right Surround Shield...
- Page 7 Page 6 of 11 Pin-outs of the TMAMP37 Card When used on the back of the Model TM-1 Monitor Screw Terminals (on card) DB37 Pin Left Low Left Mid Left High Left Minus (-) 21, 3 Center Low Center Mid...
- Page 8 LEH LEL LE- REH REL RE- 1. Plug the TM1-BI card into the DB25 Processor Input connector on the back of the Odyssey TM-1 Monitor. 2. Connect the bi-amped outputs from the processor to the screw-type connector on the TM1-BI card.
-
Page 9: Front Panel Features
4. Volume Control – Controls the volume of the internal speaker. 5. Speaker The TM-1 Monitor provides monitoring of the following channels: • L, C, R (Left Channel, Center Channel, and Right Channel) • SP1 and SP2 (Special 1 and Special 2) – can be used to monitor Left Center and Right Center Channels, or Left EX and Right EX Surround Channels. -
Page 10: Back Panel Features
The external power pack is terminated with a blue Powercon connector. It is unplugged from the TM-1 by pulling back on the metal tab and twisting the connector counter-clockwise slightly. Pull the connector straight out of the socket. The powercon connector is plugged in by inserting it straight into the socket, then twisting clockwise slightly until the metal tab slicks forward and locks. - Page 11 Refer to the above pages for a complete list of the pin configurations for the DB connectors and the breakout cards. There are two input level control potentiometers that are accessed from the back of the TM-1. There is one for processor levels, and one for amplifier levels. These are used to trim the two sets of inputs until the sound levels match switching between Processor to Amplifier on the front panel.
-
Page 12: Warranty Information
Page 11 of 11 Warranty Information Equipment manufactured by Odyssey Products is warranted against defects in materials and workmanship for a one-year period from the date of shipment. There are no other express or implied warranties. Returns During the warranty period, Odyssey will repair or replace, at its option, components which prove defective.