JVC AV28WT5EI, AV24WT5EI Instructions Manual page 6

Setting up your TV
4
Press the
AUTO PROGRAM function
The AUTO PROGRAM menu appears and the TV
channels you receive are automatically stored in the
programme numbers list (PR).
To cancel the AUTO PROGRAM function:
4 4
4 4
Press the button.
5
After the TV channels have been
registered in the programme numbers
list (PR), the EDIT menu appears
If you want to, you can now edit the programme numbers
(PR) using the EDIT/MANUAL function. For details, see
"EDIT/MANUAL" on page 25.
If you do not want to edit programme numbers (PR), go
to the next step.
3 3 3 3
6
Press the
T-V LINK menu
7
Follow the T-V LINK menu according
to the type of VCR you have connected
to the EXT-2 terminal
If you do not have a T-V LINK compatible VCR
connected:
4 4 4 4
Press the button to leave the T-V LINK menu.
The T-V LINK menu disappears.
If you have a T-V LINK compatible VCR
connected:
Follow the operating procedure "Downloading data to a
VCR" on page 29 to transmit the programme number
(PR) data.
8
Now, the initial settings are complete,
and you can watch the TV
9
3 3
3 3
button to start the
button to display the
Note:
When your TV can detect the TV channel name from
the TV channel broadcast signal, it automatically
registers the TV channel name (ID) to the Pro-
gramme number (PR) in which the TV channel has
been registered.
If a TV channel you want to view is not set to a
programme number (PR), you can set it using the
MANUAL function. For details, see "EDIT/MANUAL"
on page 25.
The AUTO PROGRAM function does not set the
programme number PR 0 (AV) for your video
cassette recorder. You will need to set this using the
MANUAL function.
In some areas you may get TV reception from more
than one transmitter, for example different ITV
regions. In this case each TV channel could be set
twice. If this happens, the first set of channels will
have the stronger signal. If you want to delete the
second set of channels, you will have to do it
manually (see page 27).