Getting Ready For Use - stageClix Pack transmitter Reference Manual

2. Getting ready for use

Attach the antenna to the back of the receiver
1.
by turning clockwise (do not use tools, do not
over tighten)
Plug the supplied adapter into a
2.
110-230V supply, and the DC plug into the rear
panel DC socket. Only use the stageClix power
supply.
3. Use the supplied patch cable to connect the
rear panel output jack to your amplifier or to
your amplifier, the input of your effects unit,
mixer or stagebox.
4. Plug the transmitter into the front socket
marked 'charge' and leave the transmitter to
charge for some time, preferably more than
one hour.
DONE!
2