Canon VIXIA HF-M300 Quick Start Manual page 3

Batteries and Using the AC Power/Charger
Attaching and Removing the Battery
1. To attach the battery pack to the camcorder, press the battery pack softly into the battery
compartment
2. To remove the battery pack:
a. Hold onto the battery pack and slide the
Battery Release Switch
of the arrow.
b. Slide the battery pack down and remove it
from the battery compartment
Using the AC Power Adapter to Operate the Camcorder and Charge the Battery
1. Make sure the camcorder power is turned off
before connecting or disconnecting the AC power
adapter.
2. If you are attempting to charge the camcorder
battery while it is on the camera using the AC
power supply, the battery will only be charged when
the camcorder is turned off.
3. When fully charged, the supplied battery should
provide approximately 130 minutes of recording
time.
and slide it up until it clicks into place.
in the direction
.
3