Disclaimer Of Liability - Embraco Compressor Applications Manual

Note: After replacement, the compressor and it's accessories must have
proper processing, and the components must be recycled according
to the material group (ferrous, non-ferrous, polymers, oils, ...) directives.
These recomendations are intended to minimize the adverse impacts that
may be caused to the environment.
The compressors here into introduced were designed for strictly use and
application according to their respective specifications. Any change or
use different from these specifications requires Embraco's previous
written consent.
Embraco specifically disclaims and excludes any liability to the maximum
extent legally permitted, in relation to compressors improperly used.
Improper use means:
(1) application of the compressors not compliant with their designs and
specifications; and (2) use of the compressors without observation of the
respective safety warnings informed by Embraco's Technical Bulletin.
Damages and losses generated by improper use of the compressors
manufactured by Embraco will be borne exclusively by the incautious user.
Eventual damage to Embraco's image will be reimbursed by the non-
compliant user.
Within the material technical boundaries that have to be taken into
consideration, but not limited to, Embraco outlines the running temperatures,
voltage and frequency supply, type of the refrigerant, type and specifications
of the starting device and overload protector.
In case you have any concerns and/or doubts, please do consult
compressors's accompanying documentation, or contact Embraco for
further information.
The use of certain refrigerants may have been forbidden or restricted
use in some countries, demanding the use of alternative refrigerants.
We advise you to check the specific regulations of your country.

Disclaimer of Liability