Advertisement
Quick Links
System Remote Control
Recharging Station
Setup Guide
Welcome!
Congratulations on your purchase of the Control4®
System Remote Control Recharging Station. With
this product, you no longer have to worry about your
System Remote Control battery losing its charge and
halting in the middle of changing channels on your
TV, while watching a video, or performing other tasks
with your Control4 system.
If the battery level drops, simply place the remote in
the station until the remote is fully charged and ready
to use again.
Control4 recommends that you keep the
remote on the recharging station when not in
use.
Available Products
These products are available for the Control4®
System Remote Control Recharging Station:
• C4-SR250RSK-B Recharging Station, including
SR-250 and Battery
• C4-SR150RSK-B Recharging Station, including
SR-150 and Battery
™
• C4-SR250RS-B Recharging Station w/Battery
(SR-250) & Cover, No Remote
• C4-SR150RS-B Recharging Station w/Battery
(SR-150) & Cover, No Remote
Optional Accessories
These products are available for purchase in case you
ever need to replace your batteries or cover:
• C4-RBATT-250-B Replacement Battery and
Cover for SR-250
• C4-RBATT-150-B Replacement Battery and
Cover for SR-150
What's in the Box?
If you've purchased the recharging station without
a remote (C4-SR150RS-B or C4-SR250RS-B), make
sure the following items are in your box:
• Recharging Station Cradle
• Power Supply
• Rechargeable Battery (Lithium Polymer for SR-
150 and SR-250)
• Battery Cover (SR-150 or SR-250)
• Warranty Card
• System Remote Control Recharging Station
Quick Setup
If you've purchased the recharging station with a
remote (C4-SR150RSK-B or C4-SR250RSK-B), make
sure the following items are in your box.
• System Remote Control (SR-150 or SR-250)
• Recharging Station Cradle
• Power Supply
• Rechargeable Battery (Lithium Polymer for SR-
150 and SR-250)
• Warranty Card
• System Remote Control Recharging Station
Quick Setup Guide
If any of these items is missing, contact your Control4
Dealer immediately.
1
Advertisement
Related Manuals for Control 4 C4-SR150RSK-B
Summary of Contents for Control 4 C4-SR150RSK-B
-
Page 1: Optional Accessories
• System Remote Control Recharging Station halting in the middle of changing channels on your Quick Setup TV, while watching a video, or performing other tasks with your Control4 system. If you’ve purchased the recharging station with a remote (C4-SR150RSK-B or C4-SR250RSK-B), make If the battery level drops, simply place the remote in sure the following items are in your box. the station until the remote is fully charged and ready to use again. • System Remote Control (SR-150 or SR-250) • Recharging Station Cradle Control4 recommends that you keep the • Power Supply remote on the recharging station when not in • Rechargeable Battery (Lithium Polymer for SR- use. 150 and SR-250) • Warranty Card Available Products • System Remote Control Recharging Station Quick Setup Guide These products are available for the Control4® System Remote Control Recharging Station: If any of these items is missing, contact your Control4 Dealer immediately. • C4-SR250RSK-B Recharging Station, including SR-250 and Battery • C4-SR150RSK-B Recharging Station, including SR-150 and Battery... - Page 2 Figure 2. Remove Old Batteries ™ System Remote Control Recharging Station Setup Guide Insert the Rechargeable Battery into Your New or Existing Remote Installation On the bottom of the remote (with the cover off and the old batteries taken out), insert the rechargeable battery by sliding the small end into IMPORTANT! The remote needs to be on OS the slot first (Figure 3). Note the orientation of + 2.4.0 or later to properly indicate the battery and - symbols for proper battery insertion. level; otherwise, a “Low Battery Warning” alert will appear on the System Remote Control SR- Figure 3. Rechargeable Battery 150 (if your dealer sets up an alert for you) or in the SR-250 window. Whether your recharging station came with or without a System Remote Control SR-150 or SR-250, follow the steps below as indicated. Remove the Old Batteries from Your Seat the battery securely into the slot and push New or Existing Remote down (Figure 4).
- Page 3 remote control. You should expect this to (Optional) To remove the power plug occur over a period of 1-2 months. adapter, press the Push button and slide the plug out. Insert the remote’s new battery cover into the Insert the power plug into a power outlet to remote. Notice the two metal plates on the cover; begin recharging. that’s how you can differentiate the old cover For convenience, place the recharging station from the new one (Figure 5). close to where you use your remote. Set the Charging Indicator on Your Figure 5. Replace Cover Recharging Station This section applies to recharging stations for existing or new remotes. Turn the recharging station over. Notice the Charging Indicator button labeled Slide the battery cover into the slot and then ‘High, Off, and Low’ (Figure 8). push down until the cover is horizontal. Slide the cover into the slot until it snaps into place. Figure 8. Charging Indicator Button Charging Attach the Power Supply to Your Indicator Recharging Station Button This section applies to recharging stations for existing or new remotes.
- Page 4 plates on the back of the remote must touch the If you have an SR-150, use this button sequence on metal pins in the recharging station (Figure 7). the remote: Depending on your light setting an indicator light may come on at the bottom of the recharging On the remote, press Room Off station. Press # Press * Press 4 Figure 7. Ensure Proper Installation Press 5 Press 6 Press 0 If you have an SR-250 that is online, follow these steps: On the remote, press List. Press Info. Press Config. Recharging Station Lights Select Recharge Station. Press Yes. This section applies to recharging stations for existing or new remotes. If you have an SR-250 that is offline, follow these steps: Depending on the Charging Indicator brightness On the remote, press List. you select, the indicator light will be High or Low Press Config.