Table of Contents
Advertisement
You can transmit to the latest Programme numbers (PR) data
to the VCR with the T-V LINK function.
Caution:
Only when the T-V LINK compatible VCR is connected to
the EXT-2 terminal, this operation is enabled.
Only when the T-V LINK menu is being displayed, this oper-
ation is enabled.
1
Turn on the VCR.
2
Press the
button.
The data transmission begins.
The T-V LINK menu disappears once the data transmis-
sion ends.
When the T-V LINK menu is changed over to
another menu:
The menu operation at the TV side is completed and it is
shifted to the menu operation at the VCR side. Refer to
the VCR Instruction Manual and operate the VCR.
Note:
If "FEATURE NOT AVAILABLE" appears at the T-V
LINK menu, ensure the following three items are cor-
rect; then press the
sion.
Has the T-V LINK compatible VCR been connect-
ed to the EXT-2 terminal?
Has the VCR power been turned on?
Does the SCART cable that is connected to the
EXT-2 terminal to T-V LINK compatible VCR have
all proper connections?
When connecting a Decoder with a T-V LINK compatible VCR
connected to the EXT-2 terminal, use the DECODER (EXT-2)
function to unscramble the scrambled TV channels.
1
Turn on the Decoder power.
2
Display the TV channel capable of being
unscrambled with the Decoder on the TV.
Even if the Decoder is functioning, a scrambled picture
appears at this time.
3
Press the
button to display the MENU.
The MENU (main menu) appears.
button to retry data transmis-
4
Press the
buttons to choose FEA-
TURES. Then press the
The FEATURES menu appears.
5
Press the
buttons to choose DECOD-
ER (EXT-2) . Then press the
choose ON.
An unscrambled picture appears.
To cancel the DECODER (EXT-2) function:
Press the
buttons to choose OFF.
6
Press the
button to complete the set-
ting.
The T-V LINK menu appears.
7
Follow the operating procedure "Down-
loading the data to VCR" on page 33 to
transmit the Programme number (PR) data
to the VCR.
8
If you have another TV channel capable of
being unscrambled with a Decoder, repeat
steps 2 through 7.
Note:
If for some reason the DECODER (EXT-2) function
has been set to "ON" but the TV channel cannot be
unscrambled, check the following:
Has the Decoder been connected to the VCR
properly according to the VCR and Decoder In-
struction Manuals?
Has the Decoder power been turned on?
Can the TV channel be unscrambled with a De-
coder?
Is it necessary to change the VCR settings in or-
der to connect the Decoder? Confirm that the
VCR is set properly by rechecking the VCR In-
struction Manual.
button.
buttons to
Advertisement
Table of Contents
