Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Contour Camera
Summary of Contents for Contour Camera
-
Page 1: Getting To Know Your Camera
QUICKSTART GUIDE Getting to know your Camera What’s In The Box? The Contour+ camera comes with: 2GB microSD Card 2 Rotating Surface Mount 1 Right Side Profile Mount 2 Camera Leashes 1 Li-ion Battery 1 USB Cable 1 HDMI Cable 1 2.5mm to 3.5mm Audio Cable... - Page 2 ABOUT THE CAMERA Record/GPS Status Record Switch Bluetooth Button Rotating Lens Microphone Port Battery Slot Battery Latch Card Format Button USB Port Configuration Switch microSD Card Slot ConnectView Card Slot HDMI Output Memory Status Power Button Battery Status...
-
Page 3: Set Up The Camera
3) Insert the microSD card in to the camera [K]. The side with the contacts should be facing to the right and the “jagged” edge of the card should be facing up. 4) Close the back door of the camera and push the door down to secure it in to the closed position. - Page 4 The Contour+ also features a rotating bezel that allows you to turn the lens 270° degrees so your video image is right side up even if your camera is mounted at an odd angle or even upside down. The barrel of the camera displays markings at 90° intervals as well as tick marks in between for reference.
- Page 5 (www.contour.com). microSD Card Formatting The camera can use any microSD card of Class 2 or higher up to 32GB in size. Once you have purchased additional microSD cards to use with your camera, they will need to be formatted to work in your Contour+.
- Page 6 4. Make certain the camera is not placed in close proximity to other electronic equipment which may interfere with the GPS signal. 5. If the camera does not obtain a position lock within 5 minutes, reset the GPS module by doing the following: 1.
-
Page 7: White Balance
(3rd and 4th generations). Your device must be running iOS 4.2.1 or greater in order to install and run the Contour Camera app. Prepare You Device You will need to install the Contour Camera app on your iOS device. The app is a free download... - Page 8 Update button to re-initiate the pairing – Do Not hold the Update button down. Once your camera is listed as a discovered device, you can pair it with your device. After the two are paired, launch the Contour Camera app.
-
Page 9: Live View
Live View You can use the HDMI port on the back of the camera to get a live view of what your camera is seeing. Plug the provided HDMI cable in to the back of your camera and then plug the other end in to the HDMI input on a TV or monitor. -
Page 10: Next Steps
HDMI Playback You can use the HDMI port on the back of the camera to play movies that you have recorded on your camera. Turn on the camera and then plug the HDMI cable in to the HDMI port. The display will show the first frame of the first video.
Need help?
Do you have a question about the Camera and is the answer not in the manual?
Questions and answers