Advertisement
BACK PANEL
The following picture shows the description and function of the back panel
components on your modem.
1
WHAT ARE THE PORTS AND SWITCHES?
1. TELEPHONE
1 AND 2
2. WAN
3. LAN
4. USB
5. FACTORY RESET
SWITCH
6. WPS
7. ON/OFF SWITCH
8. POWER
3
2
3
RJ-11 telephone ports connect to home telephone,
conventional telephones or fax machines
This RJ-45 port connects the WiFi Gateway to the NBN
Network Termination Device (NTD)
Four RJ-45 ports connect to the Ethernet port on your PC
or your home network
Connects to a printer or mass storage device. This feature is
currently disabled. This can only be made active by a remote
software upgrade
This restores the WiFi Gateway to factory default. It is not
advised that you press this unless advised to do so by an
Optus representative
You can use the WiFi Protected Setup (WPS) feature
with clients on the network that are WiFi certified and
WPA capable
Turns the device on or off. It is recommended that the
device remains on at all times
Connects your residential gateway to the AC power
adapter that is provided with your WiFi Gateway.
Caution: Avoid damage to your equipment. Only use the
power supply that is provided with your Gateway
4
5 6 7 8
Advertisement
