Advertisement
SAY HELLO TO
YOUR SHINY NEW
WIFI GATEWAY
BEFORE YOU INSTALL AND CONNECT YOUR WIFI GATEWAY, TAKE A MOMENT TO FAMILIARISE
YOURSELF WITH THE FRONT AND BACK PANELS OF THE WIFI GATEWAY.
FRONT PANEL
The front panel of your WiFi Gateway provides status LED's that indicate how well and
in what state your WiFi Gateway is operating. See the table below for more information
on the front panel LED status indicator functions.
WHAT DO THE LIGHTS MEAN?
1. POWER
ON, power is supplied to the WiFi Gateway
ON, a device is connected to one of the Ethernet ports
2. ETH
BLINKING indicates that data is being transferred over the Ethernet connection
3. WIRELESS
BLINKING indicates that data is being transferred over a wireless connection
ON indicates telephony service is enabled. Blinks when Line 1 is in use
4. TEL1
OFF indicates that phone service for TEL1 is not enabled
ON indicates telephony service is enabled. Blinks when Line 2 is in use
5. TEL2
OFF indicates that phone service for TEL2 is not enabled
6. USB
BLINKING indicates a USB device is connected and in use
ON, the WiFi Gateway is connected to the NBN Network Termination Device (NTD)
7. WAN
BLINKING indicates data is being transferred over the Ethernet connection
8. ON-LINE
ON, the WiFi Gateway is registered on the network and fully operational
2
1G
POWER
ETH
WIRELESS
1
2
1 2
3 4 5
USB
WAN
ONLINE
6 7
8
Advertisement
