Wolf Gas cooktops Use & Care Information Manual page 12

W O L F
B E F O R E U S I N G
Before using for the first time, you should
clean your gas cooktop thoroughly with hot
water and a mild detergent. Rinse and dry with
a soft cloth. This removes any residual oil and
grease left on the surface from the manufac-
turing process. Apply a stainless steel polish to
protect the finish and add luster. Refer to Care
Recommendations on page 15.
IMPORTANT NOTE: Before using your gas
cooktop, check that the surface burner caps are
positioned correctly.
12
G A S C O O K TO P U S E & C A R E
Y O U R C O O K T O P C O N T R O L K N O B O P E R A T I O N
Each burner has full flame and full simmer
capabilities. Knobs are designed as two-tiered
"push-to-turn" knobs. One tier is used for
through flame settings; the second tier
controls settings. Refer to the illustra-
tion below. Although this is a child-safe
design, children should never be left unat-
tended in the kitchen when the cooktop is in
use.
To light a burner, push down and turn the
corresponding control knob counterclockwise
to the setting. You will hear a clicking
sound and see the burner ignite. Once the
burner is lit, continue turning the knob
counterclockwise to any one of the settings—
through .
To select a SIMMER setting, turn the burner
knob to the setting; you will feel a stop
detent in the knob rotation. Push down on the
knob, continuing to turn it counterclockwise.
This moves it to the second tier. Now, select
any variation within the SIMMER flame
settings— through
Never leave pans on a
tended. Be particularly cautious when
cooking food in fat or grease. It can
become hot enough to ignite.
Two-Tiered
Control Knobs
Two-tier burner control knobs
.
setting unat-