Hyper Sound Function - JVC AV-28T4BK Instructions Manual

Remote control buttons and functions
16:9 ZOOM:
This zooms up the wide picture (16:9 aspect
ratio) to the full screen.
16:9 ZOOM SUBTITLE:
This zooms up the wide picture (16:9 aspect
ratio) with subtitles to the full screen.
FULL:
This uniformly stretches the left and right
sides of a normal picture (4:3 aspect ratio) to
fill the wide TV screen.
• For 16:9 aspect ratio pictures that have
been squeezed into a normal picture (4:3
aspect ratio), use the FULL mode to
restore the picture to its original shape.
Choose the ZOOM mode
1 Press the c button to display
the ZOOM menu
ZOOM
AUTO
REGULAR
PANORAMIC
14:9 ZOOM
16:9 ZOOM
16:9 ZOOM SUBTITLE
FULL
TV OK
D0009-EN
2 Press the 6 buttons to choose a
ZOOM mode. Then press the a
button
The picture expands and the chosen
ZOOM mode is displayed in about 3
seconds.
• The ZOOM mode may be
automatically changed by the control
signal from an external device. When
you want to return to the previous
ZOOM mode, choose the ZOOM
mode again.
14
Adjusting the visible area of the
picture
If subtitles or the top (or bottom) of the
picture are cut off, you can adjust the visible
area of the picture manually.
1 Press the c button
The ZOOM menu appears.
2 Press the a button to display the
ZOOM mode indicator
The indicator appears.
16 : 9 ZOOM
D0010-EN
3 While it is displayed, press the 6
buttons to change the position of
the picture
• You cannot adjust the visible area in
REGULAR or FULL mode.

HYPER SOUND function

You can enjoy sounds with a wider
ambience.
Press the / / (hyper sound) button to
/ /
turn the HYPER SOUND function on
or off
• The HYPER SOUND function does not
work properly with mono sound.
• The HYPER SOUND function can also
be turned on or off by using the SOUND
menu. For details, see "HYPER SOUND"
on page 23.
• Notes for Ireland model
(AV-32T4SR/AV-28T4SR/AV-32T4BR/
AV-28T4BR)
- The HYPER SOUND function works
only for the audio signal output from
TV channels. It cannot work for the
audio signal input from EXT sources.
- The HYPER SOUND function affects
the audio signal output from the EXT-1
and EXT-2 terminals. If you want to
output the normal audio signal from the
EXT terminals, turn the HYPER
SOUND function off.
6
6 6