Twisted audio TAWAS100-HT Installation Manual

80 watt windshield-mount audio system for harley-davidson heritage softail and deluxe motorcycles

Advertisement

Quick Links

twisted Audio
INSTALLATION
MANUAL
MODELS:
TAWAS100-HT
TAWAS100-DLX
80 WATT Windshield-Mount
Audio System
For Harley-Davidson Heritage Softail
and Deluxe Motorcycles

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TAWAS100-HT and is the answer not in the manual?

Questions and answers

Summary of Contents for Twisted audio TAWAS100-HT

  • Page 1 Audio INSTALLATION MANUAL MODELS: TAWAS100-HT TAWAS100-DLX 80 WATT Windshield-Mount Audio System For Harley-Davidson Heritage Softail and Deluxe Motorcycles...
  • Page 2 INTRODUCTION T A B L E O F C O N T E N T S K E Y F E A T U R E S Key Features ............· Easy Installation · OEM Fit and Appearance WARNINGS: ............·...
  • Page 3 Models with windshields as follows: · 7/16˝ Wrench or Socket Driver · T-25 Torx Driver Radio Model # Applications Visit our website at TAWAS100-HT Heritage Softail www.twistedaudioradios.com TAWAS100-DLX Softail Deluxe FIRST STEP Remove the windshield from your motorcycle and work on a bench or other flat surface.
  • Page 4 INSTALLATION · RADIO ASSEMBLY On the radio, remove the four screws and washers Note that the two upper screws are shorter than from the rear of the unit. the lower screws. ATTACHING THE AUDIO SYSTEM TO THE WINDSHIELD Attach the two provided brackets to the radio (a). The longer screws will be used in the bottom holes (b).
  • Page 5 INSTALLATION · ASSEMBLY AND ELECTRICAL HARNESS Use the long screws removed from the windshield Tighten all screws with the Torx wrench. Finally, (h) insert and tighten the center windshield frame screw. frame and insert them through the top windshield frame holes into the lower radio mounting holes (g) and finger tighten.
  • Page 6 INSTALLATION · ELECTRICAL HARNESS from the rear to the front(o) of the tank. At the rear of Now, run the audio system harness along the bike wiring the tank tape the wiring harness to the hanger using on the frame. You will need to feed the harness through the rubber wiring tunnel.
  • Page 7 INSTALLATION · HARNESS AND WINDSHIELD LOCK Now, connect the wiring harness to the battery under the Reattach the windshield — seat. The orange cable, goes to the positive terminal,(u) with the audio system to the bike (w). then the black cable goes to the negative terminal (v). Take the two-pin power plug on the audio wiring Flip the switch on the front of the radio to power harness and connect to the socket on the bottom...
  • Page 8: Important Notes

    SYSTEM COVER ACCESSORY Use the optional Twisted Audio cover accessory to help protect your audio system against the elements. IMPORTANT NOTES The audio system is weather-resistant. However, don’t expose the system to high pressure (hose & nozzel) water spray. Detach windshield/audio system when washing the motorcycle.

This manual is also suitable for:

Tawas100-dlx

Table of Contents