Dsc Settings - Silva s15 Operation Manual

Operation Manual S15

9. DSC Settings

9.1 MMSI SETTING
If the S15 has not been programmed with an MMSI, when powering ON
the unit, the VHF MMSI SET screen will appear on the display as below:
Power ON the unit, then press the numeric soft key on the microphone to
enter the MMSI numbers (9 numbers). This number can be obtained from
your local radio communications authority. If a mistake is made, use the
◄ or ►key to move back and edit the error. Then press (ENT) key, the
Radio will ask for verification as follows:
It is important that the MMSI entered is checked carefully as it can only
be entered once and if a wrong MMSI is entered it must be returned to an
authorised dealer to erase the MMSI from the memory.
If sure, press (ENT) key once again to confirm the entered MMSI, the
screen will show the MMSI of your vessel.
If you have not entered an MMSI, you can still use the unit but the default
MMSI is 000000000, and every time the S15 is turned on it will ask you to
enter the MMSI number.
Page
26