Table of Contents
Advertisement
Blind Search Mode :
- Satellite : Press the OK button to select multiple
satellites.
- Tuner : Select tuner what you want to set (Tuner
1/ Tuner 2). If you set 'Loop-Through' on the
menu
(Installation-Dish
this
Connection),
automatically disabled.
- Frequency : Set Auto to search whole frequency,
Set Manual to search only desired frequency.
- Polarity :
Select the polarity. (All Polarity/Vertical/Horizontal)
- Search Type : Select the search type.
- Dish Setting : Press the OK button to move to the Dish Setting menu directly.
- Start Search : Press the OK button to start a search.
Advanced Search Mode :
- Satellite : Press the OK button to select the target
satellite for search.
- Tuner : Select tuner what you want to set (Tuner
1/ Tuner 2). If you set 'Loop-Through' on the
menu
(Installation-Dish
this
Connection),
automatically disabled.
- Frequency : Select the frequency from the list to
search.
- Symbol rate : Enter the symbol rate by using the
NUMERIC buttons.
- Polarity : Select the polarity. (Vertical/Horizontal)
- Video PID : Enter the video PID using the NUMERIC buttons.
- Audio PID : Enter the audio PID using the NUMERIC buttons.
- PCR PID : Enter the PCR PID using the NUMERIC buttons.
- Transmission : You can select 'DVB' and 'DVB-S2'
- Start Search : Press the OK button to start a search.
Setting-Tuner
menu
(Tuner)
will
Setting-Tuner
menu
(Tuner)
will
51
be
be
Advertisement
Table of Contents
